Re: CUTTER COMP QUESTIONS
I hope I am not stating the obvious but you can still use cutter comp
and program accounting for the cutter. There are situations that can
cause problems if you are relying on the machine to account for the
cutter radius.
I am sure that there are some people that swear by part line
programming. In my 16+ years of programming I have only met ONE.
.
Relevant Pages
- Re: Dynapath Delta 20 narrow slot problem
... It also instructs that, naturally, the corner radius can be as small as the cutter radius on up to anything I like. ... That said, if i program a .186" wide slot using a .186" wide cutter and .093" corner radius the control throws error 39, invalid cutter diameter. ... I have been getting around it by programming an .187" wide slot but then the control makes several passes: center cut from center to each end and then makes a finishing pass only removing the .0005 per side theoretical. ...
(alt.machines.cnc) - Re: Dynapath Delta 20 narrow slot problem
... making individual responses over the weekend. ... pockets are permissable all the way down to two times the corner radius. ... the cutter radius on up to anything I like. ... I am programming by hand in Excel and then washing it thru Dynapath's old ...
(alt.machines.cnc) - Re: CUTTER COMP QUESTIONS
... >I hope I am not stating the obvious but you can still use cutter comp ... >and program accounting for the cutter. ... In my 16+ years of programming I have only met ONE. ...
(alt.machines.cnc) - Re: CUTTER COMP QUESTIONS
... >>and program accounting for the cutter. ... >>cutter radius. ... In my 16+ years of programming I have only met ONE. ...
(alt.machines.cnc) - Dynapath Delta 20 narrow slot problem
... I am trying to get my delta 20 to do a narrow pocket using the ... pockets are permissable all the way down to two times the corner radius. ... cutter radius on up to anything I like. ... I am programming by hand in Excel and then washing it thru Dynapath's old ...
(alt.machines.cnc) |
|
