Re: Carbide Endmills
"jon_banquer" <jon_banquer@xxxxxxxxx> wrote in message
news:1122091739.852765.250430@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> What is the reason they are always undersize ?
>
They wouldn't fit into the holders otherwise.....
--
SVL
.
Relevant Pages
- Re: Carbide Endmills
... > They wouldn't fit into the holders otherwise..... ... > SVL ... HSS is often to size. ...
(alt.machines.cnc) - Re: Carbide Endmills
... >> They wouldn't fit into the holders otherwise..... ... > HSS is often to size. ... Prev by Date: ...
(alt.machines.cnc) - Re: Clausing 5914 and Dickson Toolpost
... holder available to fit into my Aloris tool holders, ... external thread was cut with a standard 1/4" HSS bit held in the Aloris ... which fit one of the boring bar holders for the Aloris toolpost. ... crescent-shaped rocker. ...
(rec.crafts.metalworking) - Re: Size of a tool (lathe!)
... I had to mill down most of my bit holders. ... Their size designations are roughly similar to Aloris, ... I have used a Dorian toolpost on a CNC lathe and would be ... But you aren't going to fit a bent Armstrong into one of those ...
(rec.crafts.metalworking) - Re: Import BXA toolpost experience
... same fit in both stations. ... (At about 5:00 I can still slide the supplied holders on). ... the width of the two dovetails. ... re-align the wedges. ...
(rec.crafts.metalworking) |
|
