Re: DSL - A modem is a modem is a modem, right?



On Jul 27, 6:45 pm, Jeff Liebermann <je...@xxxxxxxxxx> wrote:
On Sun, 27 Jul 2008 17:32:12 -0700 (PDT), m...@xxxxxxxxx wrote:
This may or may not be applicable, but I installed a rwifi outer on a
Verizon DSL and discovered that the DSL modem was a one port router.
To get things working, all I had to do was change the default address
on the wifi router I was installing. That router had a mac clone
feature, but I didn't need to use it.

There are some like that.  The original 2-wire DSL
modem/router/wireless router only had room for one ethernet port. Same
with ActionTec GT701.  Not every router has room for 4 ethernet ports.
However, the functions are unchanged.  They can do NAT to 254 IP
addresses.  If you need more ethernet ports, just add an ethernet
switch with 5/8/16/24 ports.

--
Jeff Liebermann     je...@xxxxxxxxxx
150 Felker St #D    http://www.LearnByDestroying.com
Santa Cruz CA 95060http://802.11junk.com
Skype: JeffLiebermann     AE6KS    831-336-2558

What I was hoping this thread was going to cover is quality of DSL
modems. Pretty much you use what the ISP "gives" you, but certainly
some DSL modems work better than others in terms of bit error rate,
etc The Prestige modem I got with Covad would hang once in a while. I
complained to Speakeasy, which sent me a "free" modem from Creative.
No hang conditions, but the power on reset internal to the modem is
crap cubed. Get a power glitch and it can't restart. I have a few more
months before my contract expires, that is, I can't dump Speakeasy
unless I want a bill for that piece of crap they sent me.

It's an analog world, dammit! Quality is not a feature checklist.
.



Relevant Pages

  • Re: Can a bad Etherlink card effect browser ability to access the net?
    ... How might I log into my DSL box and verify the ... I'm a little curious about the two ADSL modem devices. ... For example, in this thread, they mention PPPOE coming from the ... The router had PPPOE ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: SBS2003 and DSL Modems.
    ... let the router do the authentication rather than some software on the SBS ... > I am trying to get SBS2003 to play well with a DSL Modem/Router. ... > The Server has an inside and outside NIC card. ... The Modem dials out, but the IP address coming back ...
    (microsoft.public.backoffice.smallbiz2000)
  • SBS2003 and DSL Modems.
    ... I am trying to get SBS2003 to play well with a DSL Modem/Router. ... The Server has an inside and outside NIC card. ... #1, Connect the DSL Modem to the outside NIC, turn off the router functions, ... The Modem dials out, but the IP address coming back from ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Bizarre and aggravating DSL problem
    ... First, when you are using a router, you must try and localize your ... Unplug the power to the dsl modem. ... Tried plugging modem in to ethernet port and usb port on 2 ...
    (comp.dcom.xdsl)
  • Re: Web server behind NAT?
    ... That is the LAN IP for the router, which allows you to use to the router's ... I don't know about an ADSL ISP, if the IP they assign to your modem changes ... port forwarded ports would not be mapped to the correct IP. ...
    (comp.security.firewalls)