Re: WAP versus wireless router




"Bob" <tecolote@xxxxxxx> wrote in message news:v5Msj.15$QC.0@xxxxxxxxxxxxxxx
Looking to set up a "hybrid" network at home. I will use my current Ethernet and wish to add wireless function to remote desktop where I can't get wires without an unsightly mess

I thought all I needed was a Wireless Access Point (such as Linksys WAP54G) but then I saw a Linksys WRT54g wireless router that is described to have "three in one" functionality. Those three functions are:
- WAP
- route
- 4 port switch

The WAP54G is about 20$ more expensive than the WRT54g, yet the WAP54g appears to have only one function (it's a wireless access point)

The WRT54g is cheaper yet is advertised to offer more functions.

My question is this: Instead of buying the more expensive WAP, can I just plug my cable modem into the WRT54G and use one of the 4 ports to Ethernet my nearby desktop in addition to wirelessly connecting the remote desktop to the net?

thx in advance
bob


I have a hybrid setup here. D-link wired router talks to the outside, then a few desktop units wired to it. D-link does any dhcp requests.
One of the 4 lan ports on the D-link goes to a LAN port on the Linksys - NOT the uplink port.
Other 3 ports can be used to plug a wired ethernet connection for a visiting computer that does not have wireless.
For the linksys, turn on WPA and related, turn off firewall, and turn off dhcp
I have the D-link as 192.169.0.1, and the Linksys as 192.168.0.2. Default for the linksys is 192.168.1.1, which puts it on a different subnet here - ok if you want internet access only, but I also need to access my wired file/print server
I can turn the Linksys off, or reset it, and the rest of the network is not affected.

You can use the Linksys as your internet access point router/firewall, and it will be both a wired hub and wireless access point. Only problem is that the preferred location for you wired hub may give very poor wireless signal to where you want to work. For the few extra $$, I like to be able to move the wireless to the best spot within the restraint of cables.

Stuart


Stuart

.



Relevant Pages

  • Re: How do I create a Wired & Wireless Network
    ... try the Internet port of the Linksys first. ... to it (don't connect either to your broadband modem). ... then go into the wireless setup and specify a new SSID name ... I believe the modem is also a router, it has 1 port for the dsl ...
    (microsoft.public.windowsxp.network_web)
  • Re: PS3 Cant Find Vista/WMP11 Media Server
    ... PS3 had finally found the WMP 11 media server while connected wirelessly to a ... Linksys WRT160N wireless router. ... the PS3 again could not find the WMP11 media ...
    (microsoft.public.windowsmedia.player)
  • Re: Connecting a BEFW11S4 Linksys Router to Motorola Surfboard
    ... > Motorola Surfboard SB5100 Cable modem in order to use wireless. ... > Ethernet port of the "LAN" ports, ... You should connect to the WAN port of the Linksys. ... > internal 192.168.x.x address provided by the router, ...
    (alt.internet.wireless)
  • Re: Serious flaw in Linksys wireless AP password security
    ... > Subject: RE: Serious flaw in Linksys wireless AP password security ... > having to settle with just WPA until Linksys updated their drivers on ... > It appears that firmware version 4.50.6 for the Linksys WRT54GS ...
    (Bugtraq)
  • Re: wireless connection at home
    ... successful and an ifconfig of the wlan0 showed that the card had sent 10 ... I went to a local computer store because I thought maybe the card was ... In the environment here I have about 4 wireless access points in the ... "LinkSys Wireless G" that is what my wife and kids connect up to, ...
    (Fedora)