Re: Looking for software that adds dhcp pcs to a host file

Ok, I'll look into "static dhcp". The router I'm using is a linksys
wrt54g. The laptops have the 3 address problem, but there are only 5
of them plus the 2 desktops (one with 2 ethernet cards), so as long as
I get 32 addresses I should have enough.

Thanks, for the suggestion. Next weekend, I'll try it. If it works,
I'll still send you an expression of my gratitude, since it still will
have saved me some effort....

.

Relevant Pages

  • Re: Linksys WRT54G and 54GS versions 5 and versions 6
    ... He's using old firmware. ... linksys switched to a different operating system -- VxWorks. ... The V5 and V6 router are also somewhat different hardware. ... my neighbor is running a WRT54G v5 using the Linksys ...
    (alt.internet.wireless)
  • Re: A second subnet
    ... I gather I will have to disable DHCP on the 2nd router and give the ... with regards the linksys access point and your previous response:- ... Unless you put the laptops on the same subnet as ... access to the existing network resources, but still allow them access to the ...
    (microsoft.public.windowsxp.network_web)
  • Re: OT: Wireless Home Network - Working now
    ... >>>The objective is to allow two laptops to share a Comcast cable modem ... >>>modem and a Linksys WRT54G router. ... >>>card on the Toshiba sees the network but will not connect to the Internet. ...
    (rec.crafts.metalworking)
  • Re: linksys router and ssh
    ... with a WRT54G. ... and there you've got a 4 port DSL/Cable router running linux. ... > having a problem with ssh and X forwarding. ... > If I bypass the linksys router and connect directly, ...
    (comp.os.linux.networking)
  • Re: Router with both USB and Ethernet ports?
    ... My old Linksys (4 port router), ... The POS router sounds like a Linksys WRT54G v5. ... Later WRT54G hardware versions, v6 ...
    (microsoft.public.windowsxp.general)