Re: HPNA Network..

John Navas wrote:
On Sat, 05 May 2007 15:26:19 -0400, burris <responder@xxxxxxxxxxx> wrote
in <7I2dnSM2x7XDR6HbnZ2dnUVZ_vumnZ2d@xxxxxxxxxxx>:

I have had for years a 4 PC HPNA network using both Netgear and Linksys cards. This always worked very well for me until I removed them to try some other types of networks.

In trying to return to HPNA, I remember that one pc must remain on with as the gateway along with ICS.

I remember that the setup automatically set up the IP and such for the gateway and the remotes all connected automatically. Does anyone remember the setup?

Are you thinking of the Windows networking wizard?

Thanks for your reply..

I am coming off a wireless router actually functioning as an access point. I disconnected that router.

I have gone through the network set up routines as well. I should mention that I have XP Pro/SP2 and each PC has an onboard NIC.

I installed the HPNA adapters and drivers and they all show as functioning, but when trying to set up ICS on the PC that will act as the gateway, it won't set up ICS...keeps indicating that the 192.168.0.1 IP that it needs is already in use.

I've released and renewed numerous times on all the machines. Perhaps the NIC on the gateway PC needs to have its IP changed..or could it be that the wireless router IP is lingering even though it is no longer connected. I use all this with a cable modem and VOIP adapter. They all work well.

Thanks for your help..
.

Relevant Pages

  • Re: connect to bridge modem
    ... ISA console, Configuration, Networks, Internal. ... IP address' wiz and move out of the .0 subnet, ... I understand that the external gateway has no business routing private IP ...
    (microsoft.public.windows.server.sbs)
  • Re: Help with theory question on network topology
    ... of the difference between a gateway and a hub. ... >> of devices are attached to each of the networks. ... >> Not all data packets pass through the gateway (My guess, ... > Token Ring and something else, the nature of Token Ring has little to do ...
    (comp.dcom.lans.ethernet)
  • Re: There is a serious problem within Server 2003 SP1.
    ... Your config is wrong - even if it worked in the past. ... It's likely that SP1 made some changes that's causing the gateways to switch, ... second gateway on a system that already has a gateway on a multihomed system, ... When a computer is multihomed with NICs attached to disjoint networks ...
    (microsoft.public.security)
  • RE: Quickie... Hopefully!
    ... both ISPs feeds end up coming into a hub/switch ... route on the machine would be 1.1.1.1 and all traffic goes there. ... via the 1.1.1.1 gateway. ... addresses on the same NIC that are different networks. ...
    (freebsd-questions)
  • Re: [Newbie] Info about ISP Gateways
    ... Regarding the private networks, this is just means that they are just a ... The ISP gateway (not on the customer ... should be unaffected by how the ISP has chosen to structure the network. ...
    (Pen-Test)