Re: How to switch to the strongest signal when using an access point?
- From: John Navas <spamfilter1@xxxxxxxxxxxxxx>
- Date: Sun, 11 Mar 2007 05:18:34 GMT
On Sun, 11 Mar 2007 01:51:16 GMT, Jeff Liebermann
<jeffl@xxxxxxxxxxxxxxxxxxxxxx> wrote in
<ein6v21gcaht569slifc117h84i2quqf6q@xxxxxxx>:
Anyway, I've had better results with non-moveable channel assignments
than the allegedly automagic interference avoidance schemes.
Me too, but I think that's more a matter of wireless access points
having no idea what wireless clients are seeing, so lack critical info
on making a channel assignment. For example, the wireless access point
might see little or no interference on channel 6, but a remote wireless
client might see massive interference. What's needed is a way for the
wireless access point to obtain interference data from clients, but
that's outside the current spec.
--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>
.
- References:
- How to switch to the strongest signal when using an access point?
- From: Zach
- Re: How to switch to the strongest signal when using an access point?
- From: John Navas
- Re: How to switch to the strongest signal when using an access point?
- From: Zach
- Re: How to switch to the strongest signal when using an access point?
- From: Jeff Liebermann
- Re: How to switch to the strongest signal when using an access point?
- From: John Navas
- Re: How to switch to the strongest signal when using an access point?
- From: Jeff Liebermann
- How to switch to the strongest signal when using an access point?
- Prev by Date: Re: Tethering Motorola RAZR V3xx (aka IZAR) on Cingular MEdia
- Next by Date: Re: cisco 350 devices not assoicating
- Previous by thread: Re: How to switch to the strongest signal when using an access point?
- Next by thread: Re: How to switch to the strongest signal when using an access point?
- Index(es):
Relevant Pages
|