Re: Linksys wrt54g: Remote Desktop
- From: puzzled186 <puzzled186@xxxxxxxxxxx>
- Date: Tue, 13 Jun 2006 23:18:14 -0400
Apparently I did not explain it correctly. The ip address i used was
192.168.1.100. I can do a remote desktop while at home using my
laptop so the firewall and setup is ok.
I just cannot access it from work over internet. The steps I folowed
are in:
http://www.portforward.com/english/routers/port_forwarding/Linksys/WRT54G/default.htm
and used ports 3389.
On Mon, 12 Jun 2006 19:19:35 -0400, puzzled186
<puzzled186@xxxxxxxxxxx> wrote:
I just got a Linksys WRT54G and I'm trying to use XO Pro's Remote
Desktop to remotely access my home PC which is connected to the wrt54g
via the hardwired LAN port.
I need port forwarding, but apparently the only IPs you can use are
192.168.1.xx Don't I need to put in my PC's actually IP address
(which I got from www.myipaddress.com ? In any event I put in the IP
address I got through ipconfig and unchecked "block anonymous....". I
can now connect "remotely" when I'm inside my LAN from a laptop to my
PC (so obviously remote desktop is set up correctly on home PC), but
cannot connect from work to my home PC.
Help... any ideas?
.
- Follow-Ups:
- Re: Linksys wrt54g: Remote Desktop
- From: Derek Broughton
- Re: Linksys wrt54g: Remote Desktop
- From: John Navas
- Re: Linksys wrt54g: Remote Desktop
- References:
- Linksys wrt54g: Remote Desktop
- From: puzzled186
- Linksys wrt54g: Remote Desktop
- Prev by Date: Re: chewing my arm off!!!!
- Next by Date: Re: Linksys wrt54g: Remote Desktop
- Previous by thread: Re: Linksys wrt54g: Remote Desktop
- Next by thread: Re: Linksys wrt54g: Remote Desktop
- Index(es):
Relevant Pages
|