Re: Lightning arresters?

"w_tom" <w_tom1@xxxxxxx> wrote:
http://www.cinergy.com/surge/ttip08.htm

Ah, that makes a lot of sense, I'll have the electrician run another
heavy wire between the lightning ground rod and the main power panel
to bond them together.

Should this bond wire go to the main power panel, or to the ground rod
for the main power panel?

Thanks!
.

Relevant Pages

  • Re: Working with Knobs and Tubes Electrical Installations
    ... house, and use 3-prong outlets where the ground wire is to the copper pole, ... You'll need to run the ground from the rod to your power panel where it ... The US Code calls for a ground rod tie in addition to ... to some outlets is a serious safety hazard. ...
    (sci.electronics.basics)
  • Re: Working with Knobs and Tubes Electrical Installations
    ... house, and use 3-prong outlets where the ground wire is to the copper pole, ... You'll need to run the ground from the rod to your power panel where it ... relying on the random condutivity between the safety ground and the ... The US Code calls for a ground rod tie in addition to ...
    (sci.electronics.basics)