Non-overlapping channel (1/6/11) isn't always optimal
- From: John Navas <spamfilter0@xxxxxxxxxxxxxx>
- Date: Thu, 30 Mar 2006 17:36:05 GMT
Just found another case where a non-overlapping channel isn't optimal:
* Router: Hawking HWR54G Rev M with latest firmware (Version 1.0 Release 11)
* PC Card: NETGEAR WG511v1 with latest drivers
* Host: IBM ThinkPad T30 running Windows XP SP2
* Fairly weak signal due to intervening walls.
* Interference from neighbors on channels 1, 6, and 10
After considerable experimentation, I found that I couldn't get a reliable
connection on any of the non-overlapping channels (1, 6, 11), but that I could
get a reliable connection on channel 3.
I've previously reported a case with similar characteristics where I also got
the best results with the router (D-Link DI-624) on channel 3.
--
Best regards, SEE THE FAQ FOR ALT.INTERNET.WIRELESS AT
John Navas <http://en.wikibooks.org/wiki/FAQ_for_alt.internet.wireless>
.
- Follow-Ups:
- Re: Non-overlapping channel (1/6/11) isn't always optimal
- From: William P . N . Smith
- Re: Non-overlapping channel (1/6/11) isn't always optimal
- Prev by Date: Re: wireless routers are crap in my house
- Next by Date: wmp54g :-(
- Previous by thread: Unable to pull an IP Address
- Next by thread: Re: Non-overlapping channel (1/6/11) isn't always optimal
- Index(es):
