Re: Multiple Wireless Access Points

The devices are Belkin High Speed Mode Wireless G Routers (F5D7231-4). They
can be configured to run in "access point only" mode.

The autoconfig address is a 169.254.x.x (I don't have the exact address
with me - these devices are at my kids' school).

The Win2K server is both DHCP and DNS server. Indeed I thought that by
setting the belkin in "access point" only mode, it would happily pass
packets between the wireless client and wired server.

Are you saying in this mode, the WAP *doesn't* have to have an address in
the same subnet as the wired computers?

"Jeff Liebermann" <jeffl@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:b892h1p1rd6lr0niohsl5f09jjqtq0vuq4@xxxxxxxxxx
> On Sun, 28 Aug 2005 02:23:20 GMT, "Joe DiGiovanni"
> <mrcpuhead@xxxxxxxxx> wrote:
>
>>Thanks! I found the WAP can be either configured strictly as an access
>>point, or as a router. Either way, when I configure it w/ an IP address
>>in
>>the same subnet as the LAN wired computers, including the Win2K server, I
>>can connect to the WAP from a wireless client, but the client doesn't get
>>it's IP from the Win2K DHCP server. Instead, it gets an autoconfig-type
>>address.
>
> Is there some reason you haven't bothered to disclose the maker and
> model number of this mystery WAP? By autoconfigurated, I presume it's
> 169.254.xxx.xxx. (Hint: Numbers, not creative descriptions).
>
>>The WAP, when just an access point, only allows me to specify the IP and
>>subnet mask. When router functions are enabled, I can set WAN IP
>>settings,
>>including IP addr, subnet mask, DNS server addr.
>
> In the WAP mode, the IP address is only for administration and
> configuration and has nothing to do with connectivity. Access points
> do bridging and no nothing of IP addresses.
>
>>The Win2K server is 192.168.0.3. The default gateway is 192.168.0.1. The
>>WAP is 192.168.0.5, and it's DHCP server capability is disabled. The
>>WAP's
>>DNS is set to 192.168.0.3.
>
> You're IP's look fine if the W2K server is acting as a DHCP server and
> DNS server. I'll assume that your gateway router is 192.168.0.1. It
> *should* work. So do some simple troubleshooting.
>
>>Any ideas why the client isn't getting through to the Win2K DHCP server?
>
> Nope. Can you ping the W2K server from somewhere?
>
> Is there some kind of IP filtering going on at the W2K server (as in
> personal firewall)?
>
> Download and play with this free DHCP query thing:
>>
>> http://www.weirdsolutions.com/weirdSolutions/files/products/desktopSoftware/desktopQueryTool/querytool_free.exe
>
>
> --
> # Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
> # 831.336.2558 voice http://www.LearnByDestroying.com
> # http://802.11junk.com
> # jeffl@xxxxxxxxxxxxxxxxxxxxxx
> # jeffl@xxxxxxxxxx AE6KS


.

Relevant Pages

  • Re: DHCP with SBS 2003 and Wireless Router assigning IP out of sub
    ... I have checked and the router is set to be an access point (its a Netgear ... dg834GT I think) and has its DHCP server switched off. ... its fine for cabled and wireless. ...
    (microsoft.public.windows.server.sbs)
  • Re: checking my router
    ... The print server computer or device that's connected to the router will have it's Network Interface Card, yeah the print server has one too, set to Obtain an IP from the Network Automatically from the DHCP Server on the network. ...
    (alt.internet.wireless)
  • Re: checking my router
    ... The print server computer or device ... that's connected to the router will have it's Network Interface Card ... , yeah the print server has one too, set to Obtain an IP from the ... Network Automatically from the DHCP Server on the network. ...
    (alt.internet.wireless)
  • Re: Static IP outside of router DHCP range
    ... range of the Linksys router DHCP server, but still in the same subnet as the ... I would like to put the video server at 192.168.1.150 ... much more then 20-50 concurrent hosts connected to it (since the router ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: What mean?
    ... I hook the ISP to my Nic with a router between ... Then I install my DHCP Server and Configure ... > on the private subnet and uses the LAN IP of the firewall as the default ...
    (microsoft.public.win2000.networking)