Re: WGT624

Am I understanding you correctly ? you are pulgging one router into the
WAN port of another router ?

If so, then stop. Its not going to work.

You can use teo router if you like, as long as you only have one of
them issuing DHCP assignments, and doing any routing functions.

If you are sure that you want to use both, setup one as a router and
then use the other as simply a switch. By doing this you will increase
the amount of available ports. The 2nd router will need to be plugged
into the LAN side of the 1st.

Feel free to elaborate, if I am missing the point here.

Email me if needed.
Jay@xxxxxxxxxxxxxxxxxxx

.

Relevant Pages

  • Re: Ethernet puzzle
    ... connect between the Zen network and the Freeola network why not use a VPN ... Get an Ethernet router such as a Vigor 2910VG. ... Connect the other WAN port to the wireless client which communicates with ...
    (uk.comp.sys.mac)
  • Re: Ethernet puzzle
    ... connect between the Zen network and the Freeola network why not use a VPN ... Get an Ethernet router such as a Vigor 2910VG. ... Connect the other WAN port to the wireless client which communicates with ...
    (uk.comp.sys.mac)
  • Re: Router/Switch/WAP confusion ...
    ... directly into the router on the end of a long cable. ... Or in fact just get a second wireless router and disable the DHCP and ... I always assumed the WAN port had to be plugged into an ADSL modem ... Or are you suggesting I could plug my 30m RJ45 cable into a LAN port ...
    (uk.comp.homebuilt)
  • Re: Network Hardware
    ... WAN Port on DLink Router connected to LAN Port1 on Vigor Router ... Without a default gateway assigned to the DLink WAN, ...
    (microsoft.public.windowsxp.network_web)
  • Re: Network Hardware
    ... WAN Port on DLink Router connected to LAN Port1 on Vigor Router ... Without a default gateway assigned to the DLink WAN, ...
    (microsoft.public.windowsxp.network_web)