Re: Just had a thought about surge suppressors...



On Oct 3, 4:14 pm, w_tom <w_t...@xxxxxxx> wrote:
On Oct 3, 2:27 pm, bud-- <budn...@xxxxxxx> wrote:

w_ is either stupid or dishonest (probably both). Read the data sheet.
The 15,000V is for ESD protection - Electrostatic Discharge. As in
shuffle across the rug and touch the wire. The source resistance is
very high -1 megohm - and current is very limited - 15mA, and short
period. The IC does not "see" 15,000V.

All appliances contain surge
protection.
..
Support for w_’s claim - zero.
People who agree with w_’s claim - zero.
People who disagree with w_’s claim - numerous.
..
Meanwhile Bud again forgets to include all those facts. 15 ma if
continuous. Massive amperes if the 15,000 volts is only a very short
term, microseconds transient.
..
If the village idiot knew what ESD was - static discharge - he would
know it was very short duration.

If the village idiot read his own sources he would know that the
energy in the ESD tests was 0.011J max and the duration of the
discharge is on the order of 100 nanoseconds.
..
Attack the messenger because Bud cannot
dispute the facts.
..
w_ has no facts.

--
bud--
.



Relevant Pages

  • Re: VoiceMax Installation Photo...
    ... Surface mount components and no ESD protection. ... damage is done with ESD discharge with ground rising above the ... positive supply potential during an ESD event. ...
    (rec.radio.cb)
  • Re: HV Ladder by Jacob
    ... lot about ESD. ... The are NO electrostatics going on here. ... it would have been an HV discharge 'with sustained current' ... Each insulator in the path had enough conductivity that it would ...
    (sci.electronics.design)
  • Re: OT Vacuum pump maintenance / repair
    ... It won't prevent ESD to elctronics on ... Compatability and ESD stood for Electrostatic Discharge. ... I make no claims as to the effectiveness of the metal roof in any ... My roof is an effective shield from that discharge. ...
    (rec.crafts.metalworking)
  • Re: MOS snapback confusion
    ... I've been going over esd protection schemes. ... to place the ESD nmos to the snapback voltage? ...
    (sci.electronics.design)
  • MOS snapback confusion
    ... I've been going over esd protection schemes. ... to place the ESD nmos to the snapback voltage? ... I mean that if the ESD current discharge stops when the mos device is ...
    (sci.electronics.design)