Re: Cleaning bearings and removing light rust

On Aug 17, 12:55 am, blueman <NOS...@xxxxxxxxxx> wrote:
Any suggestions on a good solution for cleaning bearings and removing
grime & potentially light rust?

(the bearings happen to be from my inline skates)

Thanks

Try here:
http://groups.google.com/group/rec.sport.skating.inline/browse_thread/thread/d8fd3241716d39b7/435c94db21d66f55?hl=en&lnk=st&q=inline+skate+cleaning#
.

Relevant Pages

  • Re: Cleaning bearings and removing light rust
    ... grime & potentially light rust? ... (the bearings happen to be from my inline skates) ...
    (alt.home.repair)
  • Cleaning bearings and removing light rust
    ... Any suggestions on a good solution for cleaning bearings and removing ... grime & potentially light rust? ... (the bearings happen to be from my inline skates) ...
    (alt.home.repair)
  • Re: OT: rollerblade wheels
    ... with the urethane covering, with good bearings ... if you don't need the thickness check spare wheels for "Inline Skates". ... For inline skating, the usual size is 76mm going toward 80mm as a standard. ...
    (sci.electronics.design)
  • Re: Fabricating dust covers?
    ... Donald Gillies Wrote: ... grease the bearings, ... Under the freewheel, it gets mighty grimey. ... already replaced bearings and cones on that wheel once, so letting grime ...
    (rec.bicycles.tech)
  • Re: OT: rollerblade wheels
    ... with the urethane covering, with good bearings ... Been through the farnell and RS components site,nothing obvious ... Look for the European equivalent of McMaster or Grainger or ask local mechanical engineers where they buy specialty stuff. ... if you don't need the thickness check spare wheels for "Inline Skates". ...
    (sci.electronics.design)