Problem with washing machine

Don't post much but I do enjoy reading daily. Thanks in advance for
your help!


Admiral Mega 22 Plus Heavy Duty 2 speed Model: LATA200AAE
12 years old. Never had a problem at all.


Gentle cycle and Permanent Press cycle both work fine.

Normal Wash has 4 sections:

Wash
Spin
Rinse
Spin -- doesn’t work; the washer remains full of water from the rinse
cycle and the knob moves, but the washer does nothing.

I’m thinking it needs a new timer. What say ye? Anything else I need
to consider and check before I buy a new timer?
.

Relevant Pages

  • Re: Problem with washing machine
    ... Admiral Mega 22 Plus Heavy Duty 2 speed Model: ... Gentle cycle and Permanent Press cycle both work fine. ... I’m thinking it needs a new timer. ...
    (alt.home.repair)
  • Re: Need better is_better_time_interpolator() algorithm
    ... >> weighting algorithm for their properties to select the best timesource. ... > generic timer. ... I assume pretty much every arch has a cycle timer. ... priority value that the init code can tweak as needed. ...
    (Linux-Kernel)
  • Re: Non-reversing washing machine motor
    ... to drain and spin at the end of the rinse cycle. ... Don't know about Admiral but on Whirlpool, the motor only goes lin one ... timer may be the next step. ...
    (alt.home.repair)
  • Washing Machine - Does This Sound Right? (Long)
    ... I recently purchased a Kenmore Model YPE111 top loading washing machine to replace a twenty year old Whirlpool washer which had given us faithful service for far longer than I could believe. ... Shortly after we started using our new machine we noticed that sometimes when the timer advanced to a point where a drain/spin cycle should start the machine "stalled". ... The motor did not run and an electrical hum could be heard for about a minute, until it stopped with a "click" which sounded to me like a thermal circuit breaker popping. ...
    (alt.home.repair)
  • Re: PLL frequency multiplier.
    ... run a timer in there. ... A software loop would keep adjusting the timer's ... overflow register until the timer does exactly 96 rollovers per 400Hz ... will now deliver exactly 19.2kHz at 50% duty cycle. ...
    (sci.electronics.design)