Re: Recommendation on a thermostat

FWIW, regarding the 'override' feature... in my current home, I replaced
the non-programmable stats with Honeywell RTH230B stats (5-2 day
programming, <=4 temperature intervals per day). They are accurate and
work fine. My only disappointment is how the 'override' feature works --
in programmable mode[*], when you manually set the temperature to
override the program, the temperature setting reverts back to the
scheduled/programmed temperature after 2 hours. The stats in my prior
house reverted back at the next-programmed-temperature-change. Much more
often than not, I would prefer the latter.

[*] as opposed to full manual mode, in which you set a single
temperature, and it stays set that way until you switch to programmable
mode.
.

Relevant Pages

  • Re: Amazing start to December!
    ... What I find amazing is, if we have these kind of stats, what are the stats ... snow, the greatest volume in 2 weeks since January 1987. ... a foot of snow all the time, with a maxium of 1.1 and only 13 hours in which the temperature reached freezing or above. ... What's holding us back is the lack of extraordinary low lows people like Alex are seeing. ...
    (uk.sci.weather)
  • Re: i-roast 2 profile adjustments for ambient temperature changes
    ... measured in-the-bean temperature of the ... i-roast 2 and the average programmed temperature as ... So if it is 90 F today, the % over average programmed temp will be ... programming the last stage on the i-roast by using this formula: ...
    (alt.coffee)
  • Re: Another newbie vacation home question
    ... If its reliable, its worth it, but it looks like the majority of ... features is to support a security sytem which would be a bit of a ... outside temperature and could use for programming. ... I'm getting in late at night and the afternoon temperature is 50 and is ...
    (comp.home.automation)
  • Re: Wrong results in Pdepe .m file for heat transfer in cylinder...HELP
    ... I am programming a .m-file that computes the ... of 4 layers each one having different specific heat ... inner temperature is constant, whereas the outer wall ... is giving heat via conduction to the environment. ...
    (comp.soft-sys.matlab)
  • i-roast 2 profile adjustments for ambient temperature changes
    ... I have been collecting temperature data for my roasts with a ... i-roast 2 and the average programmed temperature as ... You can use these figures to adjust your roast profiles ... programming the last stage on the i-roast by using this formula: ...
    (alt.coffee)