Re: Instant Cooling to 35deg.F
- From: Richard J Kinch <kinch@xxxxxxxxxxx>
- Date: Wed, 29 Aug 2007 11:20:05 -0500
My question is what can I
use that is readily available, not extremely expensive, safe to use,
and will chill the can in seconds?
Immerse in *drained* ice or snow and spin. Maintain *pressure* of ice
against can. Drain the melt. *Spin* the can about 60 rpm with your hand.
This gets you below 40 deg F in a minute.
You must maintain the pressure and drain the melt, or you spoil the heat
transfer. The intimate contact with a phase-change substance is critical.
.
- Follow-Ups:
- Re: Instant Cooling to 35deg.F
- From: Chris Friesen
- Re: Instant Cooling to 35deg.F
- References:
- Instant Cooling to 35deg.F
- From: georgetews3
- Instant Cooling to 35deg.F
- Prev by Date: Re: Instant Cooling to 35deg.F
- Next by Date: Re: Bats in the house........
- Previous by thread: Re: Instant Cooling to 35deg.F
- Next by thread: Re: Instant Cooling to 35deg.F
- Index(es):
Relevant Pages
|