Re: Lutron Diva dimmer broken - THANKS!



Jeff Wisnia wrote:

....
Well, I followed through and bought some 150 watt bulbs yesterday. While I was at the store looking at the lumen ratings of frosted incandescents I noticed that the 150 watt output of a "three way" 50-100-150 watt bulb was also considerably lower than that of the plain 150 watter.
Yes, a "3-way" is just a 50 W and a 100 W in the same globe.

I replaced the "Y" adaptor and its two 75 watt bulbs in just one of our two living room table lamps with a 150 watt bulb.

the results were pretty dramatic, the lamp with the 150 watt bulb was noticably brighter, so I put a 150 watter in the other one too.

Now I need someone to understand why the single 150 watt incandescent puts out 20 percent more lumens than the pair of 75 watt bulbs. (Are you reading Don Klipstein?) I'm guessing it might have something to do with more thermal energy being tossed away through four filament supports than through two, or something like that.

I can give you a partial answer. The filaments in higher wattage
bulbs are designed to run at a higher temperature. At the higher
temperatures, more of the radiated energy is in the visible light
portion of the spectrum (see http://en.wikipedia.org/wiki/Black_body )
(however still only around 3-5%). Why don't we just run all
bulbs hotter? That dramatically decreases the lifetime of the
filament. Why can we get away with running higher wattage
filaments hooter than lower wattage ones? That's the part that I
don't know.

P.S. Halogen is a technology for increasing the lifetime of the
filament, allowing you to run it hotter.


I'll be kicking myself for a while over not thinking about the lumen output when I decided to install those "Y" adaptors with pairs of 75 watt bulbs.

Most people are unaware of that, including many energy conservation
advocacy organization that encourage people to use lower wattage
bulbs. Also, it is getting harder to find light output
figures on many types of bulbs.


.

Relevant Pages

  • Re: Lutron Diva dimmer broken - THANKS!
    ... While I was at the store looking at the lumen ratings of frosted incandescents I noticed that the 150 watt output of a "three way" 50-100-150 watt bulb was also considerably lower than that of the plain 150 watter. ... I'm guessing it might have something to do with more thermal energy being tossed away through four filament supports than through two, ... Why can we get away with running higher wattage ...
    (alt.home.repair)
  • Re: Porch light keeps blowing bulb
    ... Installed a 300 watt bulb. ... Diode dropped wattageto about ... I will add that the same holds true for dimmer switches. ...
    (alt.home.repair)
  • Re: Slightly OT. Heat and a Bench Light ...
    ... or 100 watt incandescent bulb in a desk lamp. ... I'm not using a 75 or 100 watt bulb. ... I'm using a 60 watt bulb, as specified for the lamp, and always have done. ... they have always been the 'standard' tennis ball sized type. ...
    (sci.electronics.repair)
  • Re: compact fluorescent in power limited fixtures
    ... The globe that goes over the socket is long gone. ... A 60 watt bulb ... Can I put in a 55 watt cfl that is ... I also read that the fan's vibration can ...
    (alt.home.repair)
  • Re: Light Bulbs, Saws, Motors, Circuits and Basic Calculations
    ... When you first apply power, ... A single 1800 watt rated lamp is a different matter - the larger filament ...
    (sci.electronics.basics)
Loading