Re: Repairing drywall

Franklin Bourque wrote:
"Eigenvector" <m44_master@xxxxxxxxx> wrote in message
news:X7udnbPDw4cOYxfZnZ2dnUVZ_rydnZ2d@xxxxxxxxxxxxxx
So now that I've punched holes in my walls to fix the galvanized pipes,
I'm
wondering what is the most accurate way to repair the drywall.

I cut most of my holes using a punch saw, just jab it in and cut the
holes,
but is it more accurate and elegant to use a knife when cleaning those
holes? Also when repairing, is smaller better, that is is the smallest
hole
you can cut to clean the drywall the best or is a larger hole easier to
work
with?

ayd git dear sweet old mudder to do it, me bucco. arghaha
.

Relevant Pages

  • Re: Help cutting aluminum panel
    ... What would I need if I wanted to punch holes (some small diameter ... punch for the square hole in each. ... you can do a stack of several sheets of metal at once. ...
    (rec.crafts.metalworking)
  • Re: End-user print on demand
    ... There are hot-glue binding widgets that are considerably less expensive, ... 3 hole punch and binders are pretty easy, ... There's a widget that's much like a 3-ring punch, ... more holes, and the holes are flat instead of round. ...
    (rec.arts.sf.written)
  • Re: Help cutting aluminum panel
    ... What would I need if I wanted to punch holes (some small diameter ... It is remotely possible you could set up all your holes on a single platen and do them on this kind of punch, but that is really doing work it is not designed for. ... If you are doing a hundred at a time, you could set up each size punch and die and have a guide that would align the panel properly for the holes. ... There are desktop-sized versions of the OBI punches that could do this, actually you don't need the "open back" kind at all. ...
    (rec.crafts.metalworking)
  • Re: Help cutting aluminum panel
    ... What would I need if I wanted to punch holes (some small diameter ... round, and a square hole) with reasonably sharp, or tight radius edges ... The panels measure 2.07" x 8.58", and I'll probably do a whole bunch ... but would prefer to punch all holes at once. ...
    (rec.crafts.metalworking)
  • Re: Repairing drywall
    ... I cut most of my holes using a punch saw, just jab it in and cut the ... Also when repairing, is smaller better, that is is the smallest ... Kei had never heard of Scotland; and when Kei asked the way to Panley Lyris ...
    (alt.home.repair)