Re: Japanese Lamps -- no polarization on plug

The paper insulator in brass shell sockets, common in lamps can deteriorate
and if the lamp is wired incorrectly and not polarized, the body of the
fixture can become live. The reason they went to polarized plugs is because
they weren't safe, or at least as safe as they could be.




"EXT" <noemail@xxxxxxxxxxxxxxxxxxx> wrote in message
news:460a82fc$0$47157$892e0abb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
In North America up until about 20 years ago NO lamps came with polarized
plugs, both prongs were the same size. I still have a number of lamps with
non-polarized plugs on them and they still work and are still safe. They
were implemented because some people touch the threaded base on the bulb
when changing them, if the plug is in backwards it could be live and give
the person a shock. It is always a bad practice to touch the bulb base
even with polarized plugs because there is always a chance that it was
wired wrong in the plug or in the light socket.

"RBM" <rbm2(remove this)@optonline.net> wrote in message
news:O3sOh.594$HJ.195@xxxxxxxxxxxxxxx
In American fixtures the tongue of an Edison type socket should be
connected to the hot leg as it's the most isolated part of the socket and
least likely part to inadvertently come in contact with any other part of
the fixture. If these lamps use a different type of socket, it may not
matter. You can also replace the plugs with polarized ones




<sacstinkytiger@xxxxxxxxx> wrote in message
news:1175079441.432046.191510@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,

I have some lights which I bought in Japan. I have been using them
over here for like 8 years now and they seem to work fine, I have
replaced the light bulbs. One issue is that the plugs are not
polarized, and I think in Japan the voltage is lower at 100v, and
where I was living (Tokyo) was at 50Hz instead of the USA 60Hz.

Are there any issues I should know about? Can I keep using these?

If the plugs are not polarized how do these lamps work safely in
Japan?

Best, Mike.







.

Relevant Pages

  • Re: Knockers
    ... every lab had different plugs. ... In a simla vein, the Great Western Railway molished their oil lamps, and the lamp-irons on engines, coaches and Toads, with the slot on the side of the lamp instead of the back, and the lamp-iron facing fore-and-aft instead of sideways, to stop other railways from appropriating their lamps. ... Here, we hfr industrial 16A sockets for outdoor power, and have a number of leads with a plug of that ilk on one end and a single or 4-way socket on the other. ...
    (uk.rec.sheds)
  • Re: Japanese Lamps -- no polarization on plug
    ... In North America up until about 20 years ago NO lamps came with polarized ... non-polarized plugs on them and they still work and are still safe. ... wrong in the plug or in the light socket. ... I have some lights which I bought in Japan. ...
    (alt.home.repair)
  • Re: Question about reversed-polarity in an AC outlet
    ... >> the socket when changing a light bulb. ... Would you legislate that ALL lamps in the USA be required to be made ... and retrofitted to have polarized plugs way and have the LAMP POLICE ...
    (sci.electronics.misc)
  • Re: Question about reversed-polarity in an AC outlet
    ... >> the socket when changing a light bulb. ... Would you legislate that ALL lamps in the USA be required to be made ... and retrofitted to have polarized plugs way and have the LAMP POLICE ...
    (sci.electronics.repair)
  • Re: Question about reversed-polarity in an AC outlet
    ... >> the socket when changing a light bulb. ... Would you legislate that ALL lamps in the USA be required to be made ... and retrofitted to have polarized plugs way and have the LAMP POLICE ...
    (sci.electronics.equipment)