Checking Operability of Heating Element on Hot Tub
- From: "DaileyJohn.20.decij@xxxxxxxxxxxxxxx" <DaileyJohn.20.decij@xxxxxxxxxxxxxxx>
- Date: 30 Apr 2006 10:53:44 -0700
A Vita Hot Tub that was installed in 1994 is on the premises of
a house that I recently bought, and the previous owner is not available
to help me with it. The jets work fine, but trying to see whether the
heating element is working is difficult. I obtained a manual on the
internet, and it states that the heater heats about 2 degrees per hour
when the hot tub is set in the low speed mode. I am turning on what
appears to be the heater and I can feel something turn on, but when I
left the presumed heater running overnight, it did not appear to heat
up the water in the hot tub. However, the instructions are so
convoluted, I am not sure that I am following them correctly. If
anyone has any tips as to how I can determine whether the heater is
working, I would appreciate the help.
Thanks,
JD
.
- Follow-Ups:
- Prev by Date: Re: Toilet Problems/Questions
- Next by Date: Re: Checking Operability of Heating Element on Hot Tub
- Previous by thread: Repainting pressure-treated exterior stairs
- Next by thread: Re: Checking Operability of Heating Element on Hot Tub
- Index(es):
Relevant Pages
|
