Re: HELP: wall switch sparks when turned off



yes, start worrying.
who: you and an electrician
what: check the amperage of the heater and the switch to see if switch
is sufficient amps. check the circuit breaker size and wire size and
see what other devices may be sharing the same circuit.
where: at the heater electrical plate, at the switch rating label, at
the electrical panel.
when: asap
why: to avoid overheating of electrical items and avoid repeating the
burnout of a heater if it was caused by underrated switch or overloaded
circuit or insufficient wiring size.
visible sparking is not normal.
faq at:
http://www.landfield.com/faqs/electrical-wiring/part1/

.



Relevant Pages

  • Re: The RCS: Voice Transcript
    ... Have you gone through the circuit analysis for the circuit that ... sustained power to the heater is what did it. ... That thermo switch ... It is now known, however, that the tank contained two protective ...
    (sci.space.history)
  • Re: 220v conversion question
    ... I had the electrician put ... This will provide a much faster start, even if the 120V circuit ... The switch over instructions don't ... My bandsaw has a separate plug for the lamp. ...
    (rec.woodworking)
  • Re: ok to use breaker as switch for pool pump?
    ... hundreds of business's use the breakers for lightswitches. ... and the pool is on its own circuit. ... or is it something I need an electrician for? ... a breaker is not a switch, and will quickly wear out if you use it as one. ...
    (alt.home.repair)
  • Re: ODD QUESTION Re: Marshall JCM2000
    ... We were having problems even before the heater, ... a bulb) plugged into the circuit is completing the circuit. ... Google for "dim bulb tester". ... please post info after the electrician does his thing. ...
    (alt.guitar.amps)
  • Re: Circuit Breaker Tripping
    ... > baseboard heat I found that an outlet and heater were on the same ... > circuit so that I would get 120 to the outlet. ... first electrician did not keep several ... > and turn the breaker on then the whole subpanel trips from the main. ...
    (alt.home.repair)

Loading