The B&S in that range ive seen have no generator just a rotor and
stator, which might be the real issue. I might guess the car regulator
could have to high a minimum amp input need and not open.
Mystery Motor/Generator with some clues ... the generator and load banks as a dynamometer. ... of eight slip rings to the wound rotor for AC. ...stator windings, 1-1' to 12-12', and ten connections to the rotor, A, B, C ... I have been fascinated with motors for ... (sci.electronics.design)
Re: Mystery Motor/Generator with some clues ... the generator and load banks as a dynamometer. ... of eight slip rings to the wound rotor for AC. ...stator windings, 1-1' to 12-12', and ten connections to the rotor, A, B, C ... There is also a stator search coil X1-X2,... (sci.electronics.design)
Re: Ping Alan Robinson ... the stator and rotor failed at the same time, ... to a good electric motor shop and have them evaluated? ... Since I already bought the new generator,... (rec.outdoors.rv-travel)
Re: magnetism question ... >> rotor and stator as they heat up and put the squeeze on. ... > stretching to and fro wreaks the teflon to flake off. ...Pans stretch when heated- true- but take two snugly nested teflon coated ... (sci.physics.electromag)
Re: Magnetic Sheet Metal Fanner ... any magnetic field anywhere will affect another magnetic field somewhere. ... It seems to me that what we would really like to do is to to maximize the interaction between the rotor and stator as the rotor pole approaches the stator and then eliminate that interaction as the rotor moves past. ... if you consider a rotor and a stator field, the torque produced when the fields are aligned is 0, any movement away from alignment produces a torque trying to cause alignment. ... (sci.physics.electromag)
