Exterior Block Home Painting Questions

I have just finished pressure washing my block/stucco/wood home. While
pressure washing the block, some of the old paint came completely off
down to the bare block. Do I need to prime the areas that are bare or
can I just paint over it?

I'm using Glidden acrylic latex paint.

I'm painting the house with a roller and brushes were needed. (I know
spraying is easier, blah, blah, blah) I'm using a roller. What is the
easiest way to roll the bottom of the house where it goes into the
ground?

I've thought about stuffing either cardboard or visqueen (plastic)
between the ground and the house.

Is there an easier way?

This is the original paint from 1984, btw.

.

Relevant Pages

  • Re: German Stealth Materials of WW2
    ... a complete prototype aircraft in military livery have been offered. ... My guess is that *if* the RCS testing was ... iron oxide paint - then it'll show up just fine on radar. ...
    (rec.aviation.military)
  • Re: PL/I, COBOL, Advantages, Equivalence, et al
    ... as an index in an array. ... type Paint is arrayof Boolean; ... for I in Paint loop ... DEFINE ORDINAL COLOR blah blah blah. ...
    (comp.lang.pl1)
  • Re: House Painting And Pressure Washing ?
    ... Have a question regarding painting my house. ... The new paint will, I guess, be a coating that adheres to the old ... If you are pressure washing with the tip a reasonable distance from the ... As you are painting, always keep a scraper in reach. ...
    (alt.home.repair)
  • Re: Question on exterior painting
    ... he claimed that spraying the paint on was better than ... primer doesn't need to be used over the entire house - only on bare ... Pressure washing can cause problems if done from below. ... letting the shingles dry before painting. ...
    (alt.home.repair)
  • Re: Questions about pressure washing and paint spraying
    ... Once I finish pressure washing the house, how long can I wait until I ... finish painting it? ... Do I need to paint it right away ...
    (alt.home.repair)