Re: Dehumidifier Repair?


"a1steelbuildings" <a1steelbuildings.238qck@xxxxxxxxxxxxx> wrote in message
news:a1steelbuildings.238qck@xxxxxxxxxxxxxxxx

Art Wrote:
Sears has a humidifier made for low temperature use but you don't have
the
right model. If you want to see if it works take it to a warm spot and
put
it in the always on setting and see what happens. By the way the
refrigeration unit is probably warrantied for 5 years though the new
units
have a shorter warranty. Some other brands warranty the whole unit 5
years
with labor.


"herlihyboy" ryan.parmenter@xxxxxxxxx wrote in message
news:1139839055.366740.192550@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have a Sears dehumidifier like this one...

http://tinyurl.com/ah93g

It's about 3 years old.

It's not running right now, and I'm trying to determine if there is
something wrong with it, or if it is because the humidity is low and
it
is designed to not run based on the humidity setting. It has a
humidity control on it that is set on 40%. We live in SW Indiana, so
it's not too humid now. However, the basement is damp right now and
the dehumidifer isn't kicking on. I'll probably wait until Spring to
see if it will come on and replace it then if it is broken. However,
I
was wondering if anyone has advice on something to check inside the
dehumifier to see if any of the components need to be replaced.

Thanks,

Ryan


One simple way to test it is to put it in your bathroom while you are
taking a long shower. This will overcome any possible inaccuracy on
its detector.

Yeah. Put in in the tub while you are taking a shower....


.

Relevant Pages

  • Re: Dehumidifier Repair?
    ... If you want to see if it works take it to a warm spot and ... Some other brands warranty the whole unit 5 ... I have a Sears dehumidifier like this one... ... is designed to not run based on the humidity setting. ...
    (alt.home.repair)
  • Re: HELP - I need advice - MOULD in BASEMENT
    ... Keep humidity at apx 50% and mold will die on its own. ... But the trapped moisture in wood on the floor has to be fixed, ... Honestly a proper dehumidifier for your temp and sq ft, ...
    (alt.home.repair)
  • Re: OT: Whos the scientist here.....
    ... We have a big crane where I am employed that uses a dehumidifier, ... difficult due to the grade to hook up a hose to let the water drain out ... Let's say the temperature is T and humidity of the air is H grams per ...
    (rec.models.scale)
  • Polutants and Polymer sensors
    ... Last year I bought 5 dehumidifiers. ... Knock-on-wood this dehumidifier has not ... from the start the GE's readout shows 35% when the wet- ... Chemical vapors may interfere with materials used for the humidity sensor. ...
    (sci.electronics.repair)
  • Re: dehumidifier w/external sensor(s)?
    ... going to do a whole lot until there is actually some humidity in the ... I'm banking on the air channels under the Platon underlayment for air ... raise the humidity in the corner of the room where the dehumidifier ... The idea is to create an opportunity for any moisture under the plastic ...
    (alt.home.repair)
Loading