Easy wiring question

I am going to wire a new room in a basement. There will be a dedicated
circuit for it. I want to have a switch to control wall lighting but
not control the wall outlets. Do I have to split the circuit before
the switch to do this or is there another easy way?

.

Relevant Pages

  • Re: Thermocouple mux 16 ch(4067) + A/D max187
    ... >Yes the AD 595 contain an Alarm circuit that control if thare is a open ... >I tough to switch only the positive laed of TC and connect all 16 negative ... >lead togheter with the common ground of the circuit ..?ve seen that some ... If you were following the multiplexors with a differential ...
    (comp.home.automation)
  • Re: Thermocouple mux 16 ch(4067) + A/D max187
    ... Yes the AD 595 contain an Alarm circuit that control if thare is a open TC(2 ... wire open) but isn't necessary to use it. ... I tough to switch only the positive laed of TC and connect all 16 negative ...
    (comp.home.automation)
  • Re: Turning a light on and off with momentary switch
    ... That looks like a handy circuit that could be adapted to my application. ... > small 40MHz radio control. ... IF you close the switch for a moment, the inverter U1B ...
    (sci.electronics.basics)
  • Re: Circuit Design Help
    ... control a table saw and a shop vac. ... When I turn the circuit OFF... ... The main switch will automatically turn on the saw as it would be directly ... The vac will be connected through the relay that will be ...
    (sci.electronics.basics)
  • Re: Easy wiring question
    ... I want to have a switch to control wall lighting but ... >not control the wall outlets. ... Do I have to split the circuit before ... >the switch to do this or is there another easy way? ...
    (alt.home.repair)
Loading