Re: danelectro 12 string


"Nil" <rednoise@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:Xns9E8B73CDEA3A4nilch1@xxxxxxxxxxxxxxx
On 13 Feb 2011, "mcnewsxp" <mcbassguitar@xxxxxxxxx> wrote in
alt.guitar:

it needed a setup real bad, but now it's in tune and sounding
sweeter'n heck.

My Danno12 needs a truss rod adjustment at least twice a year. It's a
pain in the butte because you have to take the neck off the get at the
adjusting screw in the neck heel.

By the way, does your's neck have a very obvious join across its width
(parallel to the frets) midway down, at about the 7th fret? Mine does.
I've never seen a neck made like that. Doesn't seem to be a problem,
but it's odd.


mine's at the 3rd fret. odd, that is.

i need to find a hard shell case and was wondering about the
danelectro compressor?

I've been wanting a case since I got it. No standard case will fit it,
and the only place I've been able to find that has real Danelectro
cases for this model charges over $200 for them I didn't pay much more
than that for the guitar, so I haven't been able to bring myself to buy
it. The guitar continues to live in a gig bag.

I think a compressor is almost mandatory for this guitar, especially if
you switch between pickups - the neck pickup is quite a bit louder than
the bridge and I haven't been able to mitigate that much by adjusting
their heights.

which compressor do you use. i seen that some like the janglebox, but i
don't play often enough to reckon that option.


.

Relevant Pages

  • Re: Guitar Setup Off The Wall - New Guitar - Bad Setup From Factory
    ... Neck pockets are all done with CNC machines. ... You can waste time loosening strings and adjusting ... If theres frets that are high then no ... amount of adjusting is going to make the guitar have a proper action or tell ...
    (alt.guitar)
  • Re: danelectro 12 string
    ... adjusting screw in the neck heel. ... The guitar continues to live in a gig bag. ... you switch between pickups - the neck pickup is quite a bit louder than ...
    (alt.guitar)
  • Re: What happened to my guitar?
    ... > the neck. ... I'll try adjusting that if I ... I've lowered the saddles pretty much as far as they can ... > So what happened to my guitar? ...
    (alt.guitar)
  • el rey truss rod
    ... The neck of my el rey won't move while adjusting the truss rod. ... guitar was installed in the wrong way. ...
    (rec.music.makers.guitar.jazz)
  • Re: Yes!! Guitar on the way!
    ... a 7 1/4 inch radius neck and ... and the Player's 12 inch especially when you do bends or play full barre chords. ... with no fret out although even my usual 9 1/2 in. ... that had flawless fret ends - as smooth as any high quality guitar you ...
    (alt.guitar)