Re: 'using a Dremel to route bridge humbucker'

"§c©©t§" <guitarcool@xxxxxxxxx> wrote in news:mMe9f.2370$2y.566
@newsread2.news.atl.earthlink.net:

> in a single coil slot..
>
> Local shop says they charge "$40" to do any kind of pickup routing :(
> I've got a Dremel here that may do the trick. & would rather do this
> myself. Just wondering if anybody here has done this before and
> has any tips/etc. that would be cool thankx
>:-)-~
>
>
>

Well, if you gotta use a Dremil - do you at least have the brace that turns
it into a router???

The only advice - measure...
.

Relevant Pages

  • Re: using a Dremel to route bridge humbucker
    ... > in a single coil slot.. ... > I've got a Dremel here that may do the trick. ... a Dremel is quite probably underpowered for this ... Prev by Date: ...
    (alt.guitar)
  • Re: using a Dremel to route bridge humbucker
    ... Take a piece of stock (that's wood) and practice cutting with your Dremel. ... set up a jig first (Jig is a device so you only cut EXACTLY what you need ... > in a single coil slot.. ...
    (alt.guitar)