Re: Artcore bridge?
- From: "Clutch" <no@xxxxxxxxxxxxxx>
- Date: Sun, 30 Oct 2005 01:41:46 -0700
"Keith Adams" <keithadams@xxxxxxxxxxxx> wrote in message
news:_u_8f.2842$Jo3.2101@xxxxxxxxxxxxxxxxxxxxxxx
> You dont want to put any two sided tape between the bridge and the
> body.
The thin double face tape like what is used for gift wrapping has no impact
on tone. And I doubt you could destroy the polly finish on an artcore unless
you were really trying.
>Nor would it be wise to drill holes in your guitar.
Tell that to the Gretch guys who have been doing it for 50 years. It's
called pegging the bridge and it's pretty widely accepted as an improvement,
especially when there's a floating bridge/bigspy involved... which is found
on some Artcore models.
>One solution is to not take all the strings off at once.
That works great until you knock it while changing the strings. Better to
just learn how to re-set it no matter what you do you are going to knock it
out at some point.
>If you bang on the guitar
> hard enough to move the bridge while playing then you're no guitar
> player. Sell it and buy some drums.
>
what's it like to live in a vacuum?
.
- References:
- Artcore bridge?
- From: CM
- Re: Artcore bridge?
- From: Keith Adams
- Artcore bridge?
- Prev by Date: Re: Marshall combos
- Next by Date: Re: Artcore bridge?
- Previous by thread: Re: Artcore bridge?
- Next by thread: Re: Artcore bridge?
- Index(es):
Relevant Pages
|
