Re: Spinning the bass?


-the HoSt- wrote:
"Danko" <dankoxy-znakic-koji@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:f7id3s$ofc$1@xxxxxxxxxxxxxxxxxxxxxx
Hey all,

You know - upright bass - pluck - spin - pluck -spin. How do you do that
while your pickup is plugged to the amp and your cable on the floor?

VERRRRRRRRY CAREFULLY!

lol, I had to...

Host.

GOOD ONE! I was mightily straining to come up with a nice wise-ass
comment, but couldn't do it. I'm glad SOMEONE did!

Benj

PS. if the question is serious, you have to "hop" the bass over the
wire just like jumping rope! :-)

.

Relevant Pages

  • Re: Spinning the bass?
    ... while your pickup is plugged to the amp and your cable on the floor? ... lol, I had to... ...
    (alt.guitar.bass)
  • Re: Test chamber question
    ... Of course a few speakers are placed in this room. ... Floor is concrete, walls are of concrete blocs 14 cm thick. ... can operate the amp for short periods without over-heating. ...
    (rec.audio.pro)
  • Re: Why dont guitarists put speakers on poles?
    ... Some guys report that they like the amp on the floor, ... Some mention that it depends on the guitar, ... Most of the time the PA speakers are in the air for some of the ...
    (rec.music.makers.guitar.jazz)
  • Re: Test chamber question
    ... I need to make it "sound proof" and there must be a method to get rid of the excessive heat generated by the amp under test. ... Floor is concrete, walls are of concrete blocs 14 cm thick. ... floor and ceiling with insulation. ...
    (rec.audio.pro)
  • Re: Amp Stands for Tilting Only, but Not Lift Off the Floor?
    ... amp/ speaker rests solid on the floor and does not tip over easily. ... I use has to involve something behind the amp. ... off the floor, as far as I can tell, which decouples the bass. ... Tilt the cab back, pull the handle down and set it down on ...
    (rec.music.makers.guitar.jazz)