Re: Super Reverb Reissue Problem
- From: Jim <askme@xxxxxxxxxxxxxxxxx>
- Date: Fri, 08 Jun 2007 12:09:58 -0700
O.K. Lethem wrote:
My reverb channel has had a volume loss to where there's still sound
just not very much of it. The first channel works fine. So, it's my
preamp tubes right? Can I swap the preamps tubes from channel to
channel to get my main channel back?
Got a spare 12AT7? Reverb driver isn't 12AX7. The phase inverter is also 12AT7. You could swap those two and look for a change in behavior. Then replace the reverb driver.
But first: Unplug and re-plug the connections to the spring.
.
- Follow-Ups:
- Re: Super Reverb Reissue Problem
- From: Jim
- Re: Super Reverb Reissue Problem
- From: Lord Valve
- Re: Super Reverb Reissue Problem
- References:
- Super Reverb Reissue Problem
- From: O.K. Lethem
- Super Reverb Reissue Problem
- Prev by Date: Super Reverb Reissue Problem
- Next by Date: Re: Super Reverb Reissue Problem
- Previous by thread: Super Reverb Reissue Problem
- Next by thread: Re: Super Reverb Reissue Problem
- Index(es):
Relevant Pages
|
