Re: Can a tech remove the Amps 110v transformer and install a 220v?

Thanks, thats what I call some expert advice!
Will order on monday so im good to go!


On Sat, 28 Apr 2007 19:32:37 -0700, Elvis Kabong <ampscience@xxxxxxxxxxxx> wrote:


"Jay-" <no@xxxxx> wrote in message news:op.triwyggs18r7ik@xxxxxxx
Its the hotrod.

I guess the shop in my new country performs the conversions.
hmm...

thanks again

The American transformer part number is 041752
The export transformer part number is 041753

If you have or can get the 041753 transformer,
the violet wire goes to CP3
Black/Red wire to CP5
Black/Green wire to CP7
Black/Yellow wire to CP8
White wire to CP9
White/Black wire to CP4
Black wire to CP10

Good luck

.

Relevant Pages

  • Re: Neon Transformer Question
    ... I paid $40 for a new oil furnace ignition transformer (about 75 watts ... my own transformer from scratch and spent about $100 on magnet wire. ... I'd like to use them that will send meter-long lightening arcs around ... mandrel for the bobbins. ...
    (sci.electronics.design)
  • Re: AC/voltage basic physics questions, please.
    ... positive voltage and one terminal is at a similar but negative voltage ... A cernter-tapped secondary on your pole transformer ... wire service to your home at 120-0-120 volts. ... That gives us three terminals on the side of the ...
    (sci.physics)
  • Re: Why is my amp blowing up?
    ... with a black and a red wire. ... when you apply power. ... An isolation transformer will prevent *some* ... The problem is that once you connect any AC-powered test equipment to ...
    (rec.audio.tubes)
  • Re: Neon Transformer Question
    ... I paid $40 for a new oil furnace ignition transformer (about 75 watts ... my own transformer from scratch and spent about $100 on magnet wire. ... I'd like to use them that will send meter-long lightening arcs around ... mandrel for the bobbins. ...
    (sci.electronics.design)
  • Re: Current transformer Wire wrapping
    ... >>> Im trying to build a current transformer from a U Bolt. ... >> use more wraps of magnet wire and houuse wire ... >>> Everybody talks Iron, but of course I assume that this ubolt is made ...
    (sci.electronics.basics)