Re: On Topic - JCM2k effects loop level or: WTF Marshall?


"Ant Moore" <nospam@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:12aa5f8m6pu20f@xxxxxxxxxxxxxxxxxxxxx
Hi there,

"Stephen Cowell" <scowell@xxxxxxxxxxxxx> wrote in message
news:R3_og.57613$Lm5.31103@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

....

Seriously, there's no output level trim on the TC?

Doesn't help. The problem is that the signal level
presented to the TC goes up with the channel volumes,
so you'd need to tweak TC input and output if you
adjusted a channel volume to keep optimal signal
level into the TC without clipping.

Sounds like a desirable feature, to me... each channel
has pre- and post-gain settings... all it's lacking is
a master pot... and if the master was before the loop,
you'd still have to balance the channels, right?
__
Steve
..


.

Relevant Pages

  • Re: $40 coupons for digital/analog converters
    ... I would like to hear from somebody who got the coupon and purchased ... Signal Quality display (allowed easy tweaking antenna direction to reduce ... Simple remote wit a BIG channel UP and Down buttons (you will need them if you ... Signal level indicates less than 25% on the same lead ...
    (alt.tv.tech.hdtv)
  • Wifi Signal Quality
    ... I am a wee bit puzzled as to the relationship between signal quality, signal level and noise level. ... Encryption key:off ... Frequency:2.462 GHz (Channel 11) ...
    (comp.os.linux.networking)
  • Re: On Topic - JCM2k effects loop level or: WTF Marshall?
    ... The problem is that the signal level ... presented to the TC goes up with the channel volumes, ... and if the master was before the loop, ... That'd work provided the loop ...
    (alt.guitar.amps)
  • Re: Sharp Aquos slow channel changes
    ... On cable, when using the channel up and down buttons, ... Channel change times when using the digital tuner depend on the signal level ... things I looked at besides signal strength was how fast the channel change ...
    (alt.tv.tech.hdtv)
  • Re: Old /boot, Grub, FC3
    ... >> with a WD drive as master and an older Samsung CD drive as slave. ... >> to channel B. The logs show that FC3 booted and configured both IDE ... it is not Grub that is having ...
    (Fedora)