Re: Power Transformer Requirements...


Mick;

Yeah. I forgot the transformer. Use the Hammond 270HX.
secondary 275 - 0 - 275 @200 ma
Filaments 5V @ 3A (CT) 6.3v @6A (!!)

Spec at Torres among other places.
http://www.torresengineering.com/hamclaspowtr.html

Wayne

On 13 Mar 2006 06:25:14 -0800, "Mick" <mike@xxxxxxxxx> wrote:

Wayne Asked
***
Do I understand that you require approx. 65ma. @ around 270vac and
2.6a @ 6.3 vac?
***

Hello Wayne,

Great to hear from you. The current transformer is already giving me
those numbers (approximately). It is a 269EX. To do what I proposed,
I'd need something with almost twice the current (actually about
118mA).

How is your amp progress coming?

Mick
.

Relevant Pages

  • Re: Space Shuttle voltage problem
    ... I  have a voltage problem at the input of the flipper board. ... then I have a bad transformer #2. ... powers only that connector. ... transformer and good BR with no other faults should read approx 48V AC ...
    (rec.games.pinball)
  • Re: Generating a 20hz 90v signal phone ringer
    ... > I'm trying to make a telephone ringer. ... I have had thoughts of hacking one of those analog ... A small 120v transformer with, say, a 12v secondary. ... secondary with a lower voltage AC waveform than 12v to get approx 90v out. ...
    (sci.electronics.repair)
  • [TECH] Bally transformer power supply help needed
    ... Transformer is E-122-125 ... Power supply board is AS-2518-54 ... all within spec. ... I am reading 37VDC on it! ...
    (rec.games.pinball)
  • Re: WTF Very excessive wall voltage
    ... The utility will adjust voltage to provide the additional load ... You've noticed something out of spec. ... The power company should be able ... to adjust the tap on your transformer to put you back within spec.. ...
    (rec.games.pinball)
  • FS: Specialized Roubaix Expert 56 Cm 2006
    ... Used approx 1000 miles, ... Compact double. ... Full spec and info @ ...
    (rec.bicycles.marketplace)