Re: Pregnant with Baby Amplifier...AX84 High Octane...And P1

Mick;

I dealt with having to make large holes in *** metal and found (not
having the correct punches) a dremel to work extremely well. Nibble
what you can and finish it with a dremel or demel like tool. You can
get a knock off for like $30 at the Home Depot and demel tool bits
will work in the off brand.

I've been looking at cabs and most have slanted control panels (not
good). So maybe a mini head would surfice. Like one of those old
Sovtek amps. This is going to be a blast.


Check out this link for a look at the Mig-50.

http://www.astring.com/sovamps.html

Wayne

On 30 Dec 2005 16:59:45 -0800, "Mick" <mike@xxxxxxxxx> wrote:

>Wayne,
>
>I have to agree about punching the chassis. Not really looking forward
>to it, but I wanted to use a larger chassis than the kit because of all
>the mods I'm adding. Also know that these high gain little beasts can
>be prone to hissing, humming, and screaming, so I wanted to put the PT
>waaaaaaaaaaaaaaaaaaaaaay over there and the input section
>waaaaaaaaaaaaaaaaaaaaaay over here.
>
>Four tens is the ultimate to my ears. Really pure and vibrant. I saw a
>Fender 4 x 10 Cab at a local pawn shop that I could snag for $150. Not
>sure if it's still around or not.
>
>Mick
.

Quantcast