Re: Lowering the voltage on tubes

Relevant Pages

• Re: Strategy for automated bias control
  ... Ian Iveson wrote: ... One such is bias control. ... with a microprocessor that is not in the audio path but monitors bias, ... Also see lots of possibilities for controlling tone switching that can ...
  (rec.audio.tubes)
• Re: Audio Switcher Help
  ... I'm trying to use the MAX4571 essentially to mute some audio channels, ... Then you must likely bias your audio at 1/2Ub, ... their 'no click' switching seems to be a slow 8 ms bump. ...
  (sci.electronics.design)
• Re: Bi-wiring vs bi-amping
  ... difference when switching from bi-wired to bi-amped, ... quite clearly heard a difference (as did my friend who was in the room with ... but expectation bias doesn't only work ... As non-objective humans, we have subconcious ...
  (uk.rec.audio)
• Re: Im going to Cathode Bias my SF Bassman
  ... >> I'm going to Cathode Bias my SF Bassman. ... >> But I have to order up a couple parts for the amp first. ... >> Has anyone other than Doug Roccaforte tried cathode biasing a Bassman ... I ordered some parts for doing the cathode bias last night, ...
  (alt.guitar.amps)
• Re: Bassman AB165 mod advice
  ... ""Cathode bias it, lift the cathode grounds, install separate 500 ohm ... 5watt resistors, bypass each with 25mf 100V caps, disconnect the bias ... And Mark Baier was convinced that I was running my tubes too ...
  (alt.guitar.amps)