Re: FS: 59 Bassman RI Tube Rectifier and Jensen P10R Upgrades

Sounds reasonable Craig. I've got one too. What do you intend to replace her with?

craigbro63@xxxxxxxxx wrote: 
I am selling my 59 Bassman Reissue that has been modified with a tube
rectifier and Jensen P10R speakers. I presently use this amp for harp
with a 7 piece horn band and have plenty of power to spare! I have
installed 12AT and 12AX preamp tubes but will throw in the original
12AX7 tubes and the original solid state rectifier.
This is a killer harp amp but equally as great for guitar. Cosmetically
I would give it an 8 out of 10 due to some tolex scrapes. Electrically
everything is 100%.
I originally paid 650 for the amp and paid a local tech around 400 for
the upgrades so I would like to get 800 for the amp.
Let me know if you have any questions or offers.
Thanks,

.

Relevant Pages

  • Re: time-delay turn-on with tube rectification
    ... NOT to go SS rectifier. ... If you are building a tube amp, then it seems only proper to use a ... It has a 6.3V heater which is incandescent. ... One can wire the DLS16 and the power relay in such a way that ...
    (rec.audio.tubes)
  • Re: Selenium rectifier question
    ... sells 'C-Cap' rectifier replacements and he states that his 5R4 ... wiring into the amp with an Ohm-Meter and try to locate a low ... Next I would check all anode-to-grid caps like eg C19 at V8b. ... overvoltage in the 600V circuit (i.e. reading 900+ when all's supposed ...
    (sci.electronics.repair)
  • Re: add on ear joy
    ... resistor to be able to use very large filter capacitance ... Tube rectifiers will sure sound different in aguitar amp. ... Just what effect a tube rectifier might have on the sound under such ...
    (rec.audio.tubes)
  • Re: interesting new amp from Traynor
    ... Tube rectifiers can and do affect tone, but the degree of effect depends on the actual rectifier tube being used, voltages, values of filter caps, and current draw of the amp circuit. ... Generally speaking, rectifier tubes lower the voltage, and the power reserve available for instant output from the power supply. ...
    (alt.guitar)
  • Re: 5.8v for filaments and low B+? On topic!!!
    ... The PT shouldn't really even be warm unless pushed. ... releases 1.0A for the filament circuit ... depending on the type of SS rectifier you implement. ... secondary and DC B+ in that amp? ...
    (alt.guitar.amps)