Re: Positioning layers
On Fri, 24 Mar 2006 15:55:27 GMT, George Dingwall wrote:
Try dragging the layer to the new image while holding down the shift
Hope this helps.
Easy! Thanks for your help.
- Re: Preview
... holding down shift works reliably. ... selection by one of the corner handles. ... Shift has no effect when dragging from ...
- Re: Positioning layers
... Try dragging the layer to the new image while holding down the shift ...
- Re: Weird Problem When Opening Access
... I then have to go into Task Manager and end the Access process and ... And then when you do your double click and holding the shift key Access actually ...
- Re: CS4 new interface
... Not even dragging a layer to somewhere else is he same. ... Don't like the default how images are opened, I like the windows to float on screen. ...
- Re: how to implement 8x8 circular shifter on FPGA
... I have an input port that tells the shift value. ... you could use muxes or multipliers as suggested, however a lower cost solution is to use a set of layered 2:1 muxes. ... The first layer either passes the data in the same order or rotates it by 4 positions, and is controlled by the msb of your shift control. ... dedicated F5 and F6 muxes in Virtex would reduce the size of the 8:1 mux, but at the cost of increased routing complexity and higher fan-out loading on the circuit driving the shifter. ...