Re: Space Ace DVD-Rom?

Joe, I took your advice and contacted a UK based Rom Burner. I will be
getting the ROMS on a 6 DVD set, inclduing ALL of the DAPHNE games
(DAPHE + ROMS + MPEGS).

I'll post again when I get them and confirm they work!

Thanks

Alex
www.retroarcadian.co.uk
www.doctorshopper.co.uk

JoeP wrote:
RetroAradian wrote:
Where can I get a copy of the Space Ace DVD-Rom for use with Daphne on
my Mame Cabinet?

I want the video files - I have heard that the Digital Leisure DVD Rom
is better than the CD Rom versions, but can't find for sale in the UK.

Any advice?

Alex
www.retroarcadian.co.uk
www.doctorshopper.co.uk

I would look up a rom-burner in google for your area. It will cost you
much less and from my experience the converters are very hard to get to
work properly. The rom burner makes it much easier a complete set of
roms/mpeg files/cabinets/snap etc....should cost around $20us or less.
I bought the digital Leisure pack and found it hard to convert.

Joe

.

Relevant Pages

  • Re: ToM ROM version question....
    ... Looking to upgrade mine from 1.2, any advice? ... You need two chips to run 1.4H ToM: ... 1.4H ROM chip:http://www.thatpinballplace.com/ (It's not listed but just email and ...
    (rec.games.pinball)
  • restoring my old PET
    ... I still have the first computer I ever owned, namely the venerable Commodore PET with the 6540 ROM and 6550 RAM and chiclet keyboard. ... I thought I'd fix up both electrical and cosmetic problems, so I thought I'd ask for advice here. ... I thought that to fix the small rust spots, I'd use a Dremel tool with a tiny wire brush to eliminate the rust and then use touch up paint. ...
    (comp.sys.cbm)
  • boot problem vxworks_rom
    ... So Asks an advice in everybody. ... Problem is use vxworks_rom for ROM base boot. ... leaving about 1MB space for the ROM image. ...
    (comp.os.vxworks)
  • Re: best replacement WPC driver board
    ... If diagnostics is telling you the ROM is bad, ... the diagnostics say the ROM is out. ... bazooka (new driver board) than a bb gun (replacing caps and ... I'm open to advice. ...
    (rec.games.pinball)
  • Re: ToM ROM version question....
    ... Looking to upgrade mine from 1.2, any advice? ... You need two chips to run 1.4H ToM: ... John's ROM list, as Jeremy pointed out, I did not see it, only v1.3. ...
    (rec.games.pinball)