Re: speaking of drivers - out of phase sound


"William" <nospam@xxxxxxxxxxxx> wrote in message news:J8idnZyJs9VdGo7VnZ2dnUVZ_s2tnZ2d@xxxxxxxxxxxxxxxxxxx

"Walter_Slipperman" <WalterS@xxxxxxxxxx> wrote in message news:BKtQj.22973$%41.7259@xxxxxxxxxxxxxxxxxxxxxxx
I am having a problem with the sound going out of phase. I have a dual boot; Vista Home Premium 64, and second partition for XP. With XP I did not install any special drivers from the Asus installation disk of my P5E motherboard - maybe I should. But I did install it for Vista.

When things are working okay in Vista, but I need to use XP and I have to boot to XP I am finding that when come back to Vista I end up with something really badly messed up in the sound for all apps, like iTunes, where it sounds like I am listening to surrond speakers full of swirling out of phase info, with no front channel stuff. I only have front channels hooked up. I then have to get out the P5E disk and reinstall the drivers, and sometimes even that doesn't work the first time. I have always been able to get the sound back with reinstalls although today I've done two reinstalls of the drivers and I still have the problem. Plus I'd like to figure out what the problem is and not have to deal with this. I am using the SoundMax drivers off the Asus P5E install disk.

\Walter

You need to install the audio control program for the SoundMax hardware. I'm not familiar with SoundMax, but I believe somewhere on the mobo CD their has to be a 'program' to control the SoundMax hardware, perhaps for both XP and Vista. Their is a big difference between the 'drivers' and the 'control program'. The control program is used to set the speaker environment, such as stereo (2), 4, 6, and 8 speaker systems. If you have not set this, you will get all types of weird sound problems.

XP and Vista have their own general sound programs, but they usually don't get into the particulars of a given sound system setup. That is up to the manufacturer of the sound hardware, be it on the mobo or on an add-in board. Look for the sound program and install it for both XP and Vista. Then set it up as you want it and all should be OK.

William


That makes sense and I will install the sound control program into my XP installation. I am also running Windows Virtual PC 2007 with XP vm's in there too, and found sound problems after using the vm's. I will install it into every vm that I run.

But now I'm starting to realize that I might have two separate problems happening. I think I have a flakey output connector or flakey mini-stereo jack. When I wiggle things the echo/phasey/hollow, surround channel type sound goes away and I get the direct L/R signal back. This is one of those frustrating two-problems-at-the-same-time things. And it explains why removing the drivers sometimes fixes the problem because throwing the disk in the drive is slightly shaking the connector.

One thing that I've been doing for years on a range of motherboards is to take the mini-stereo jack and run it to two phono splitter cables where I split the signal so that it goes off to Aux inputs on a small home entertainment center that provides the L/R speakers around my monitors. The other output from the splitter goes to a cheap headset with microphone for doing Skype, with the microphone part connected to the MIC out from the sound card. I'm not sure what sort of problems I am creating driving both the Aux input and the headset. I probably have some impedance missmatch but I've not had a problem on the last couple soundcards where I did this. Maybe the onboard sound card on the P5E doesn't like it -- although the problem only recently started after using the motherboard like that for five months.

So for now I have removed the splitter and I'm sending the L/R from the motherboard's sound card directly to the Aux input of the Home entertainment center. When I want to do Skype I have to plug in the jack to the connector on the front of the computer and that shuts of sound to the speakers. That's okay because I don't do Skype every day but it's a very minor hassle. I wish there was a way to have both outputs - the rear one on the sound card and the front one on the case (of course going to the sound card) active.

\Walter

.

Relevant Pages

  • How I fixed my Vista Print Spooler Problems
    ... putchased Vista Ultimate with the intent to upgrade my XP system. ... errors stemming from the Print Spooler Service. ... with an upgrade install of Vista Ultimate. ... I attempted to manually clean all my drivers and registry changes ...
    (microsoft.public.windows.vista.print_fax_scan)
  • Re: replacing Vista with XP/w2k and possible problems with drivers
    ... My complaint is about MS who forced HP to sell computers with VISTA only. ... Your statement that HP is happy to supply computers with XP would seem to be false, if it did not provide XP-compatible drivers for your model. ... You probably are aware that they do not supply system install disks. ...
    (microsoft.public.windows.vista.general)
  • Re: XP installation software drives & activation problem
    ... u think xp SP3 is better than vista in this case? ... xp drivers some not able to install using the Acer DVD even when i tried to ... install manually or automatically. ... only Atheros type of wLan in the Acer DVD. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: XP update loses sound card
    ... I have tried selecting and installing all sound hardware from the select ... Maybe there is something I missed with drivers during ... Did you try a forced install, so ad new hardware -> ... I have been out of sound for months. ...
    (microsoft.public.windowsupdate)
  • Re: Installing XP-Pro
    ... Following instructions from the web, I used Vista to create a new, ... The disk spins, various programs are read from it ok, and then when it ... hit the F6 key to install a third party SCSI or RAID driver. ... Usually these drivers can be obtained from the ...
    (microsoft.public.windowsxp.basics)