Re: Promise controller problem on P4P800 E Dlx

In article <cocgl3pn6o7b4nn8jjeb48srkjskf5a87m@xxxxxxx>,
omaurizio@xxxxxxxxx says...
Hi all,
I have just installed a new HD: WD 5000AAKS 500 GB, but my Promise
controller can see only 465 GB. This happens at boot up (capacity is
shown on boot up screen) and do not depends on the Windows Xp drivers
(378ata_100104528.zip) installed. Obviously under Xp the shown
capacity will be the same as on boot up.
Any suggestions?
TIA


http://www.popularmechanics.com/how_to_central/technology/4206535.html

Bill
.

Relevant Pages

  • Re: Can logon my computer
    ... Once you've launched Windows, though, Windows can't ... find the appropriate driver for your boot device. ... The drivers for that controller got trounced and had to ...
    (microsoft.public.windowsxp.help_and_support)
  • Total Confusion--Please help!
    ... I have hard drive connected to Primary Controller set as Cable Select, ... and went to load the chipset drivers from the ... it asked if I wanted to install the ATA Serial GUI (takes place of PCI ... Controller and just not select the Boot Rom portion and then reload the ...
    (microsoft.public.windowsxp.hardware)
  • Re: Changing DC harddisk
    ... installation to a new computer in one of several ways. ... and you can feed the drivers then. ... drive is not the drive itself, but rather the controller. ... Windows boot ...
    (microsoft.public.windows.server.sbs)
  • Re: No controller detected when boot FreeBSD 7.0
    ... with hptrrand (unlike the usual behaviour of most Raid Controller ... drivers ) it considers this fact to be of such vital importance that it really had to print out ... the console setting -- there's no conceivable way changing one should ... affect the other -- but that changing the way the boot messages are displayed has managed to draw your attention to it. ...
    (freebsd-questions)
  • Re: Using Startup Disk with SATA HDs???
    ... You can slipstream the sata/raid controler drivers into a new installation ... I installed the Sata Drive Controller files when I first installed WinXP. ... Do I have to do it each time I want to boot using the Win CD or Boot ...
    (microsoft.public.windowsxp.general)