Re: M2N8-VMX motherboard




"Venom" <Venom@xxxxxxxxxxxxx> wrote in message
news:Ifs%i.13745$CN4.6644@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

"Fred" <bluser@xxxxxxxxx> wrote in message
news:5q6vt0Fud69bU1@xxxxxxxxxxxxxxxxxxxxx

"Venom" <Venom@xxxxxxxxxxxxx> wrote in message
news:JIn%i.13626$CN4.1928@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

"Rob" <robc@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:PdmdnQaQDvyNZ6DanZ2dnUVZ_jSdnZ2d@xxxxxxxxxxxxxxxx
Venom wrote:
"Rob" <robc@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:kMWdnYfwaej8OqDanZ2dnUVZ_umlnZ2d@xxxxxxxxxxxxxxxx

Venom wrote:

Is there anybody out there in Australia using this motherboard?
The motherboard drivers cd was not with the motherboard when I
got
it

and I

have downloaded everything from the ASUS site but I still can't
find
the
driver for ACPI \ ATK0103 High Precision Event Timer and I was
wondering

if

anybody else is having this problem.




V,
Look on the Downloads Page under Utilities at the very bottom.
You
should find it there.
Rob C.



There were two problems in device manager and that fixed the ACPI \
ATK0110
problem but not the ATK 0103 problem.
I read a post in Google where one bloke said that this driver
automatically
loads when you load the motherboard drivers from the motherboard cd
but
was
not of any more help. I just find it odd that this is so but I
guess
he
could be right as I have no way of proving it. Getting another
motherboard is
out of the question for me at this time.



V,
The drivers on the ASUS website aren't always the newest. You might
download therm direct from nVidia. If your using WinXP(32bit) I
believe
you have a 405/6100 chipset on your board. If so, try here:
http://www.nvidia.com/object/nforce_nf4_winxp32_8.26_11.09.html
If the error is related to the brains of the board that may cure the
issue. Might have something to do with AMD Cool N' Quiet as well!
Do
you have it enabled in BIOS?
Rob C.


You are correct in your assumptions with the chipset and XP Pro 32bit.
Cool
and Quiet is enabled. To my way of thinking, an error is an error and
should
be fixed. The grossly annoying part is that the hard drive led on this
case
is nice and bright and flashes like a strobe security light. Damned
annoying.
I tried that driver and nothing has changed except that now my SATA
hard
drive and burner are now on the taskbar in the safe to remove section.
Obviously it is not that particular driver problem.

Re you using XP SP2? The high precision event component was supplied
with
sp2.


It must be only with nVidia chipsets then. I have built one with SIS and
one
with VIA chipsets with no drama just starting with SP1. I don't have a
slipstreamed XP Pro and as all my bits and pieces are on external USB
drives
I only load SP1 to get the USB gear working. My next thought this morning
was SP2 but the damned thing crashed before I tried it. Later on this
afternoon I will format and start again but try SP2 and see what happens.


SP2 sorted the little bugger out ok so that has to mean that the driver is
on the motherboard cd in the first place.
All I have to do is find someone who is using this motherboard and get a
copy of the motherboard cd from him and all will be well.


.



Relevant Pages

  • Re: P4P800 SE -- drivers for networking?
    ... Your manual should have a drawing of the motherboard, ... shows a Marvell driver ... Marvell, ... I checked in the BIOS and the on-board LAN is enabled but the onboard LAN ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Dead Mobo or PSU?
    ... cleared out a bunch of dust and decided to buy a new heatsink and PSU ... was searching for a new driver to the new 8600 GTS, ... download and install that driver while the system was still shutting ... motherboard wasn't even going through post anymore. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Epox EP-8RDA3+ motherboard
    ... Nvidia motherboard chipsets just aren't Linux-friendly -- because ... Linux can deal with basically any ol' CPU and any ol' RAM circuitry; ... but doesn't list the driver. ...
    (comp.os.linux.hardware)
  • Re: M2N8-VMX motherboard
    ... The motherboard drivers cd was not with the motherboard when I ... can't find the driver for ACPI \ ATK0103 High Precision Event ... I read a post in Google where one bloke said that this driver ... System timers are the timers used by ...
    (alt.comp.periphs.mainboard.asus)
  • Re: No audio device after latest Widows Update
    ... the driver you need will correspond to the audio codec on your motherboard. ... While the vast majority of onboard audio solutions are either AC’97 or HD ... determine what type of audio solution you have on your motherboard. ...
    (microsoft.public.windowsupdate)