Re: P5K Series - where to plug in the mouse?


"SumGuy" <some@xxxxxx> wrote in message
news:470df500$0$23824$5a62ac22@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

"Bill" <spamtrap@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:MPG.2176ca501bd37ab09896bc@xxxxxxxxxxxx
In article <41372$470d290b$5471814c$3479@xxxxxxxxxxxxxx>,
erich.seidenschmiedt@xxxxxxxxx says...
hello NG, I am somewhat puzzled by the description on the ASUS
homepage of
the above cited MoBo series, where under Back Panel Ports they say
"1 x PS/2
Keyboard", but nothing about a PS/2 mouse connector. The pictures
of the
back panels also shows only one connector. So can anyone tell me
how I can
connect the mouse?
Thanks and regards, Erich



Use a USB mouse.

Bill

Or a PS-2 > USB converter.

Many mice come with these included


I've only seen them with a USB -> PS/2 converter.

Eric

--
Remove the dross to contact me directly


.

Relevant Pages

  • Re: globalsat bu-353 usb gps using serial or ps2 port
    ... As it happens, coincidently or otherwise, both of my GPSr's have the same pinouts so I can use them interchangeably with the two DC-DC adapters and PDA connecting cables I have. ... The quality on some of the the accessory DC-DC adapter/PDA connector assemblies sold as accessories for the mouse style GPSr's is suspect. ... the data pair in the PS/2 connector is a RS-232 TXD/RXD pair. ... So if you have a DB-9P COM port (either hardware or through using a serial to USB adapter) if you connect your receiver's TXD and RXD to the DB-9P RXD and TXD pins it might work. ...
    (sci.geo.satellite-nav)
  • Re: PIC, Keyboard, and USART
    ... As I understand the connector from the schematic (no, ... I'm not talking about USB keyboards. ... And I think the PS/2 ... so that it plugs into a PS/2 mouse adapter hole on a IBM PC/AT system. ...
    (sci.electronics.basics)
  • Re: Cursor speed
    ... were actually dual-mode mice that supported either USB or PS/2 based on ... adapter actually able to support any PS/2 mouse, ... The first kind is the connector reshaping one, ...
    (comp.sys.mac.system)
  • Re: Cloning WinCE 5.0 component
    ... My target hardware doesn't have PS/2 connector, only USB. ... I will receive notification for all device ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Mouse problem - Optical mouse with PS/2 - USB connector wont work
    ... PS-2 Connector. ... It does sound like the USB ... replaced it with another optical mouse, this time with a USB to PS/2 ... I brought a mouse home from work, again with the USB to PS/2 adapter, ...
    (microsoft.public.windowsxp.hardware)