Re: Continued XP and Vista hang on install - MB issue?
- From: "old man" <dl@xxxxxxxxxxxxxxx>
- Date: Fri, 10 Aug 2007 19:36:40 GMT
Try with only a single HD & DVD and one stick
Read the mobo manual as to any specifics regarding sata setup
(Installing on another sys then moving the hd is not going to work, without
a repair installation)
"Bluenose 637" <wgkenney@xxxxxxxxxxx> wrote in message
news:6_2dnU4-153ZCyfbnZ2dnUVZ_jadnZ2d@xxxxxxxxxxxxxx
Hi all,
Thanks for the help on my previous post. As a reminder here is my system:
" just finished building my new rig. Asus P5K Premium MD, 4 gig Crucial
DDR
800, Intel Core 2 Duo E6850, Nvidia GTS 8800, 2 WD Caviar Sata 2 HDD, Sata
DVD rom, Sata RW DVD." Again, everything shows fine on the POST in the
bios set up.
My system still hangs on installing windows XP or Vista - Have tried both.
It hangs at different spots. I have made it as far as the copy files
stage. In either install it starts to copy and then the DVD rom (Lite on
RW sata drive) seems to stop turning. It is like it is not getting a
signal to write and just gives up and stops. Sometimes Vista hangs right
before the "select language" screen, sometimes it takes a long time but it
makes it through that screen to the enter the code screen and I have
gotten all the way to the copy.
Here is what I have done:
I installed both hard drives in a win xp sp 2 machine and they worked
fine. I formated them and moved files around
I installed vista on one of the drives while it was in the win xp sp2
machine so the vista disc is good
I tried installing the drive with vista on it back into my new rig hoping
that it would boot. the new machine cannot seem to find a bootable drive
with it in. Seems like that should have worked
I took the Lite On Sata DVD RW drive out and put it in the win xp 2
machine and it worked fine (ran video, transfered files etc). It is a
"vista ready drive" so it should be okay with Vista (should I try an IDE
drive to see if it works?)
I have 4 sticks of crucial 1 g ddr2 800 memory. I only installed two at a
time and keeping them in their pairs tried switching them into the slots.
So unless they are all bad it should not be the memory. So with only 2
sticks in at a time in the proper slots I should not be dealing with the
3gig 32 bit issue or QVL (this memory is approved for 2 slots in this MB)
My graphics card works fine and it would appear that the cpu works fine
(not sure how to test these)
My audigy 2 sound card does not seem to be an issue
My power supply is an Anetc Phantom 500w and that seems to be working
fine. Heat sink is a Thermaltake 120a. seems to keep the cpu at around
room temp. It is very big though.
The only thing I have changed in the Bios is the boot order (cdrom first),
disabled the 3.5" 1.44 floppy, and disabled the onboard sound so there is
no conflict.
I'm really hoping it is not the MB. Any thoughts guys. I'm pretty much
at a loss here. Config issues? Does it matter which sata drive I plug
into (must it be Sata 1 for instance). any other trouble shooting ideas?
Any help would be great.
.
- Follow-Ups:
- Re: Continued XP and Vista hang on install - MB issue?
- From: Bluenose 637
- Re: Continued XP and Vista hang on install - MB issue?
- References:
- Continued XP and Vista hang on install - MB issue?
- From: Bluenose 637
- Continued XP and Vista hang on install - MB issue?
- Prev by Date: Re: win98 compatible...
- Next by Date: Re: win98 compatible...
- Previous by thread: Re: Continued XP and Vista hang on install - MB issue?
- Next by thread: Re: Continued XP and Vista hang on install - MB issue?
- Index(es):
Relevant Pages
|
