Probe2 uses 99% of CPU!
- From: Mastertone <none@xxxxxxxx>
- Date: Fri, 29 Jun 2007 20:25:09 GMT
Using Probe2 on my A8N-SLI Deluxe to check my temperatures, it uses as
much as 99% of my CPU and raises the temp 10 degree (F). Is there
something else I can use to check temp's other than this resource hog?
Thx!
.
Relevant Pages
- Re: Precision M4300 Laptop Fan/Speedstep Issue
... I just used it occasionally to monitor temperatures when I first got the laptop. ... could its settings be influencing the fan speed? ... Ram, 2.00GHz cpu. ... GPU temp: 50 C ...
(alt.sys.pc-clone.dell) - Motherboard and CPUs Temps Confusing as Reported
... The problem is instead of a CPU fan, I have a one of those giant heatsinks that is connected by a rubber duct to the 120 mm back case fan which pulls the hot CPU air out of the case. ... This solution seemed very novel at the time and keep the CPU running at low temperatures for the most part. ... When I turned the temp monitors back on, ...
(alt.comp.periphs.mainboard.asus) - Re: FX 60 HSF and Case Recommendation
... cpu temps. ... Antec minitower (front and back 120 fans and one side 90 fan) ... One trick to bringing the case temp down, ... number might represent a typical cheap heatsink. ...
(alt.comp.periphs.mainboard.asus) - Re: Whats an acceptable temp increase when overclocking?
... that it is the likely source of the BIOS and Probe CPU temp readings. ... other temperature sensors. ... DTS measures relative temperature - a reading of -20C from the sensor ...
(alt.comp.periphs.mainboard.asus) - Re: Whats an acceptable temp increase when overclocking?
... that it is the likely source of the BIOS and Probe CPU temp readings. ... other temperature sensors. ... DTS measures relative temperature - a reading of -20C from the sensor ...
(alt.comp.periphs.mainboard.asus) |
|
