Re: P5W DH Deluxe - PC boots from USB device insertion - how to stop?



Griff wrote:
Hi,

When I insert a USB device eg USB Pen into my Belkin Hub my PC Boots
up.
I also have an External HDD plugged into this Hub and if I switch it
on with my PC off it will boot the system automatically.

It does not seem to happen if I plug directly into the PC itself.

Board is a P5W DH Deluxe and just wondered if it was a BIOS setting?

Anyone know why this is happening?

Try a different port for the hub as 2 of the rear usb ports support wake up
and 2 don't.

From the manual
"USB ports 3 and 4 support S5 wake-up by USB, for the location of these
ports see page 2-4"
p.s. 3and 4 are next to the audio connector.
HTH


.



Relevant Pages

  • Re: AHCI - remove probing of ata2
    ... ACPI: bus type pci registered ... registered new interface driver hub ... USB Universal Host Controller Interface driver v3.0 ... hub 1-0:1.0: 2 ports detected ...
    (Linux-Kernel)
  • Re: Help interpreting AHCI failure messages
    ... investigate I decided to try putting the root fs on a usb memory stick ... PERCPU: Allocating 57344 bytes of per cpu data ... registered new interface driver hub ... hub 1-0:1.0: 6 ports detected ...
    (Linux-Kernel)
  • Re: Two USB ports dissappeared...
    ... I am running a Fedora 11 system based on the Supermicro SuperWorkstation ... two ports in front seem to have disappeared as far as Fedora is concerned. ... My bios is set to support 12 USB ports. ... hub 1-0:1.0: USB hub found ...
    (Fedora)
  • Re: How to understand USB displays in device manager
    ... The ports themselves are not enumerated if they are empty. ... The same applies to an empty USB port on a USB hub. ... >> 3)Are the number of USB ports available for device connection are same ...
    (microsoft.public.development.device.drivers)
  • USB 2.0 probs with Asrock K7S8X-E+ with XP - HI-SPEED device plugged into non-HI-SPEED hub errors
    ... I am having USB 2.0 probs with Asrock K7S8X-E+ on board USB2.0 ports ... non-HI-SPEED hub errors'! ... ASRock Motherboard drivers CD says use XP drivers for USB 2.0,and ...
    (microsoft.public.windowsxp.general)