Re: P5B=VM Memory Use
On Sat, 9 Jun 2007 15:43:33 -0700, "DaveW" <nothing@xxxxxxx> wrote:
Most boards running in 32 bit mode that attempt to run all four RAM slots
run into timing instability. The recommended way to get 2 GB of memory in
such a case is to run 2 x 1GB sticks. Or switch to 64 bit OS.
Well I tried the 2 x 1GB sticks and memtest checks them as OK, but
boot to the operating system and video errors start. Streaks across
the screen. then screen junping. I tell you I have had it with this
board. The video card runs solid in other machines. Any one have a
suggestion on a ASUS intel MB thats running solid with 1 GB sticks in
two or four slots. Oh, bye the way, with the 2 GB memory ,(1 GB sticks
in two slots) no settings or combination of settings available in the
BIOS had any effect on the stability of the system. Any way, thanks to
all hands that offered suggestions and recommendations, Appreciate it.
Dewayne
.
Relevant Pages
- Re: System freezes
... How much RAM memory? ... Start, Control Panel, System, Advanced, Performance Settings, Advanced ... It is likely that an allocation of 12% has been made to System Restore ... the System and Application logs in Event Viewer for the last boot. ...
(microsoft.public.windowsxp.general) - Re: Minimize. Wont Respond. Help?
... When you cannot switch your notepad to the background and reopen it well, I would recommend you to clean up your registry and scan for malware or spyware on your computer. ... If all those games were never responding after switching from background, then there might be a memory problem. ... Then, you can try to change shared graphic memory settings in BIOS, such as AGP Aperature Size. ... A larger paging file my allow more applications to be running at the same time but it may slow down your machine while reading content from there to resume your games. ...
(microsoft.public.windows.vista.general) - Re: USB problem
... if I disable USB 2.0 then the problems appears to go away. ... Can bot with memory stick or insert memory stick while PC is running with no problems. ... Did a quick web search on 0x000000FC and found reference to SP3 & DEP settings. ...
(microsoft.public.windowsxp.hardware) - Re: Bios says PC6400 running at 5300 on a P5WD2 Premium
... the bios show it as PC5300. ... It says "Provided for Overclocking Purposes ... >settings other than 5-5-5 if your memory supports that. ... >how much of an impact optimizing these settings would have. ...
(alt.comp.periphs.mainboard.asus) - Re: P4P800se and populating all memory slots?
... memory manually, but it always kicked me back to 266mhz 2-2-2. ... and take me back to the bios screen). ... I'd start by looking at the SPD contents. ... If you use manual memory settings, you can override some of the ...
(alt.comp.periphs.mainboard.asus) |
|
