Re: A8V: USB 2 not working

rmd wrote:


I have found even after installing xp sp2 the devices do not
automatically go to usb2 or enhanced usb etc.

I have had to manaully go to device manager, and right click on the
usb hub or one of the usb devices, and install driver...it then
searches the computer and installs the usb2

sometimes you get a little yellow warning triangle telling you the
device is not installed...but no always...I have managed to get it
from saying usb to enhanced - usb which then runs at usb2 speeds.

regards
rmd


There is too much blood in my alcohol system

Updating the driver for the Enhanced USB Controller in Device Manager was one of the first things I tried.

Unfortunately there are no updated USB 2 drivers for Win XP SP2, for any hardware, available anywhere (note the legal phrasing on the VIA web-site - means Microsoft have put the frighteners on them). So, naturally, the driver update wizard reports that no drivers better than the ones already installed can be found. Result: no change to system operation.
.

Relevant Pages

  • Re: USB Printer Port Problem
    ... Maybe not the latest drivers, ... I suppose what I was asking is that because the USB controller is a ... There are no yellow question marks listed in Device Manager. ... And how does this compare to un-installing the Ports that the ...
    (microsoft.public.windowsxp.general)
  • Re: Cant Find Root Hubs
    ... [[In Device Manager, USB game controllers are listed under Human Interface ... If you do not see USB Root Hub, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: How to determine if I have USB 1.1 or 2.0?
    ... This is how I know I have USB 2, ... I just went to my father's house and his device manager shows no ... However, his USB2 manufacturer is ... controller wills only good as a quick check instead of a solid ...
    (microsoft.public.windowsxp.basics)
  • RE: DVD Burner errors
    ... Can you burn other Files..? ... If the drive is not showing any errors in device manager or elsewhere, ... I am using DVD creator as part of Roxio ... However I have a four way USB 2.0 port and when I try with the USB ...
    (microsoft.public.windowsxp.hardware)
  • Re: usb device not recognised
    ... Is your 120 gb USB2 compatible? ... installed the usb2 card. ... > the card appears to be seated properly and ok as i have tested a usb flash ... > i have disabled the old usb 1.1 in device manager and also disabled in the ...
    (microsoft.public.windowsxp.help_and_support)