Re: P4C800 USB problem?


Venom wrote:
<lee@xxxxxxxxxxxxxx> wrote in message
news:1157334266.841051.147030@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I've got a P4C800 that for some strange reason will not read my 1GB
Lexar Jump drive on the USB ports connected to the front of the PC but
works fine on the rear ports. XP sees the drive but says there's
problem with it. The drive works fine on every other system I've tried
it on and my camera works on these ports fine. Has anyone else seem a
similar problem?


You may have to get the motherboard manual out and check that the front
ports are wired correctly to the motherboard.

I had a different motherboard in this case initially so when I swapped
the ASUS in I did check them and they appear to be correct.

.

Relevant Pages

  • FreeBSD 5-STABLE, MSI KT880 , fxp and SCB timeouts
    ... My last motherboard burned down to ashes so I got myself a brand ... I've already switched hub ports, ... acpi0: on motherboard ... <ACPI PCI bus> on pcib0 ...
    (freebsd-stable)
  • System hanging in acpi during shutdown
    ... including acpi and it now hangs during shutdown after reporting: ... This is a Gigabyte GA-7VRXP motherboard and dmesg reports: ... pci0: <PCI bus> on pcib0 ... 2 ports with 2 removable, ...
    (freebsd-stable)
  • boot hang - uhub2: device problem, disabling port 1
    ... npx0: on motherboard ... pci0: <PCI bus> on pcib0 ... 2 ports with 2 removable, ... em0: Link is up 100 Mbps Full Duplex ...
    (freebsd-stable)
  • Re: Chassis E-Sata connection to MB
    ... I am looking at the X58 motherboards and I don't see any that have an E-Sata header on the motherboard (most have E-Sata rear panel ports). ... to the SATA motherboard connector and spans to a back panel PCI bracket ... shorter cables with it. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Compnent for a new Media Centre PC?
    ... Get a motherboard with a Firewire 1394 port as well as at least 6 USB ... Video card ... The ports would be on the motherboard, ...
    (microsoft.public.windows.mediacenter)