Re: A8N32-SLI Premium - why does my removable disk tray show as drive 0 ?
- From: Michael Chan <rdevil2004-magic@xxxxxxxxx>
- Date: Thu, 31 Aug 2006 02:16:56 +0800
On 29 Aug 2006 03:09:22 -0700, "ScottHW" <scotthwnet-ng@xxxxxxxxx>
wrote:
I have three 500GB SATA II drives, two internal and one in a removable
tray (as you may have seen described in another recent post). When the
removable drive is mounted it shows as disk 0 in Disk Manager (XP Pro
SP2), When it is removed the main boot drive moves into "Disk 0"
position. Makes no sense as I have that removable tray plugged into
SATA 4 connector on the mobo. Any idea why the mobo and/or OS insists
on showing the (in my opinion) wrong drive as Disk 0 ? On occassion
(not every time, don''t understand the pattern) when the removable tray
was not loaded, when booting, right after POST I get
In BIOS, please check the boot sequence. You must have the
configuration to boot from removable first.
Michael
.
- References:
- Prev by Date: Re: A8N32-SLI - can I use the SATA_RAID 2 connector without RAID ?
- Next by Date: Re: p4p800-x no post
- Previous by thread: A8N32-SLI Premium - why does my removable disk tray show as drive 0 ?
- Next by thread: A8N32-SLI - can I use the SATA_RAID 2 connector without RAID ?
- Index(es):
Relevant Pages
|
